Get started

Indicators and strategies

Volatility Stop Run Planner [AGPro Series]Volatility Stop Run Planner 🧠 Core Idea Is the current volatility spike a stop-run review context, or is it behaving more like real expansion? 📌 Overview / What it does Volatility Stop Run Planner is a chart-first volatility risk and execution-readiness tool designed to evaluate sharp ATR expansion around recent range edges. The script studies wick expansion, ATR load, close recovery, range-edge penetration, reclaim quality, and early follow-through. It then converts qualified events into a 0-100 planner score, a clear next-action state, reclaim guides, invalidation guides, target-room references, stop-run review zones, expansion review zones, and a clean AGPro planning panel. It does not predict where price must go next. It does not automate entries or exits. It is built to organize volatile stop-run and expansion contexts so traders can evaluate the event with more structure. 🎯 Purpose & Design Philosophy This script was built for traders who need a practical decision framework during fast volatility spikes. Many charts look most confusing exactly when volatility expands: wicks stretch, stops may be triggered, range edges are breached, and the candle can either reclaim or continue. This planner fills that gap by asking whether the spike is showing stop-run characteristics, real expansion behavior, or a cooldown state that still needs confirmation. The design supports a planning mindset: identify the event, evaluate quality, locate the reclaim level, define invalidation context, estimate target room, and decide what deserves attention next. ⚡ Why This Script Is Different Most stop-run tools focus on liquidity sweeps, stop-hunt zones, or level raids. This script does NOT try to become another liquidity grab detector, stop-hunt map, order block map, or generic sweep marker. Instead, it focuses on the volatility event itself. It evaluates whether a spike around a recent range edge is recovering, rejecting, expanding, or entering a cooldown window. The core output is not a buy or sell signal. It is a planner state that helps the user decide whether the current volatility context deserves review, patience, or no action. ⚙️ Methodology 1. Context Detection The script measures ATR load, candle range relative to ATR, wick dominance, body efficiency, and recent range-edge interaction. 2. Reference Mapping It maps the recent high / low reference range, the reclaim level, the spike extreme, the invalidation guide, and the target-room reference. 3. Reaction Evaluation The model scores stop-run risk, reclaim quality, volatility load, range-edge penetration, and expansion quality. These components are blended into a 0-100 planner score. 4. Visual Output Qualified events are displayed through stop-run review zones, expansion review zones, reclaim lines, active risk / target guides, optional volatility cooldown boxes, premium labels, alerts, and a compact AGPro panel. 🗺️ How to Read the Chart Zones = stop-run or expansion review areas created around qualified volatility spike events. Labels = compact event markers showing the detected context, planner score, score tier, and next-action state. Colors = bullish reclaim contexts use AGPro teal, bearish reclaim contexts use AGPro pink, and expansion / neutral review contexts use controlled accent tones. Panel = the panel summarizes Spike State, Planner Score, Stop-Run Risk, Reclaim Quality, Risk / Target, Volatility Load, and Action. 🚦 Signals & States • Bull Stop-Run → downside spike below the recent range edge followed by reclaim-quality behavior. • Bear Stop-Run → upside spike above the recent range edge followed by rejection-quality behavior. • Expansion Up → volatility spike closes cleanly above the recent range edge with stronger body efficiency. • Expansion Down → volatility spike closes cleanly below the recent range edge with stronger body efficiency. • Spike Watch → volatility is elevated, but the candle has not yet produced enough reclaim or expansion evidence. • Normal Load → no qualified volatility event is currently detected. 🔔 Alerts Logic Alerts trigger when the planner detects a qualified Bull Stop-Run Review, Bear Stop-Run Review, Expansion Up Review, Expansion Down Review, or Spike Watch context. These alerts are attention markers. They are not trade instructions, entry signals, exit signals, or automated strategy commands. 🧩 Confluence Logic The strongest planner states appear when multiple conditions align: ATR spike + wick expansion + range-edge penetration + reclaim quality + clean risk / target context. When the spike reclaims the reference level with strong wick rejection, the stop-run review context becomes stronger. When the candle closes beyond the range edge with strong body efficiency, the expansion review context becomes stronger. 📊 When to Use • Around sudden volatility spikes • Near recent range highs or lows • During breakout or breakdown attempts • After large wick candles that need structured interpretation • When deciding whether a fast move deserves review, patience, or no action ⚠️ When NOT to Use • Extremely low-liquidity symbols • Very noisy micro-timeframes • News-driven candles with abnormal gaps • Markets where ATR is distorted by isolated historical spikes • Situations where the user expects a simple signal-only entry tool 🎛️ Key Inputs • Sensitivity → controls how selective the spike and stop-run planner should be. • Reference Lookback → defines the recent range edge used for spike evaluation. • ATR Length → normalizes volatility, invalidation, target room, and label spacing. • Minimum Planner Score → sets the score required before events are drawn. • Confirmation Mode → controls how strict reclaim or expansion confirmation should be. • Cooldown Bars → defines the post-spike visual review window. • Visual settings → control zones, labels, guides, panel theme, panel location, and font sizes. 🖥️ Interface & Visual Design The interface is designed to stay chart-first. The panel provides the decision summary. The chart zones show where the volatility event happened. The reclaim line identifies the reference level. The risk / target guides frame the active review context without turning the script into a trade command system. The visual hierarchy is intentionally compact, premium, and readable. 🧪 Practical Usage Workflow 1. Read the panel to identify the current Spike State and Planner Score. 2. Check whether the chart is showing a stop-run review, expansion review, or spike watch context. 3. Compare the reclaim line with the candle close and wick behavior. 4. Review the invalidation and target-room guides. 5. Interpret the event within broader market structure and volatility conditions. 🔍 Interpretation Guidelines A high stop-run risk score means the spike has stronger rejection and reclaim characteristics. A high expansion score means the spike is behaving more like continuation through the range edge. A cooldown window means the event needs follow-through review rather than immediate interpretation. No single score should be read in isolation. The strongest use case is to combine the planner state with structure, liquidity, trend, and timeframe context. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not an auto trading system • Not a guaranteed signal tool • Not a liquidity grab detector • Not a stop-hunt zone map • Not an order block or FVG map ⚠️ Limitations & Transparency Volatility behavior changes across symbols, sessions, and timeframes. ATR can expand sharply during news, low-liquidity gaps, or abnormal market conditions. Some stop-run-looking candles can still continue in the same direction. Some expansion-looking candles can fail quickly. The script provides structured context, not certainty. 🧠 Market Context Notes Stop-run behavior often appears when price briefly trades through visible reference areas and then reclaims them. Expansion behavior often appears when price accepts beyond the reference with stronger body efficiency and less rejection. The planner is designed to help users separate these contexts with a consistent rule-based framework. 🧾 Use Case Examples When price spikes below a recent low, leaves a large lower wick, and closes back above the reference, the script may classify the event as a Bull Stop-Run Review. When price expands above a recent high with a strong body close and limited upper rejection, the script may classify the event as Expansion Up. When volatility spikes but reclaim or expansion evidence is incomplete, the script may show Spike Watch or keep the event in cooldown. 🧱 System Philosophy Volatility Stop Run Planner follows the AGPro Series decision-engine approach: Context first. Risk before reaction. Reclaim before assumption. Expansion quality before excitement. Attention markers instead of promises. 🔐 Non-Promise Statement No indicator can remove uncertainty. No state, score, label, alert, line, or zone should be interpreted as guaranteed market direction. 📉 Risk Disclosure Trading involves risk. Users remain responsible for their own analysis, risk management, and decisions. This script is for educational and analytical purposes only and does not provide financial advice. 📚 Educational Note The script is designed to make volatile candles easier to review by separating stop-run behavior, expansion behavior, and cooldown context into a clean visual planning workflow.
Pine Script® indicator
by AGProLabs
TraxisLab - Reversal EngineTraxisLab Reversal Engine is a precision-focused reversal and continuation framework designed to identify high-confluence long and short opportunities using trend, momentum, volume, multi-timeframe confirmation, VWAP context, vector candles, and smart trade management logic. This version includes a stronger anti-repaint structure, confirmed-bar signal handling, EMA slope filtering, volume confirmation, score gap validation, pending entry previews, and multi-timeframe alignment. The goal of the Reversal Engine is to provide a complete visual decision layer for traders who want cleaner signals, stronger filtering, and structured trade levels directly on the chart. Core Concept The script uses a scoring-based signal engine to evaluate both bullish and bearish conditions. Instead of triggering signals from one single condition, it combines multiple layers of confirmation: Trend direction EMA alignment EMA slope strength RSI and stochastic momentum ADX trend strength Volume confirmation VWAP context Vector candle activity Market structure signals Multi-timeframe direction Score gap between long and short conditions A signal is only shown when the selected conditions reach the required threshold and pass the active filters. Signal Modes The indicator includes three signal modes: Aggressive More responsive signals with lower confirmation requirements. Standard Balanced signal logic for general use. Conservative Stricter filtering for higher-quality but fewer signals. A manual score override is also available for users who want full control over the required signal threshold. Anti-Repaint Logic This version includes a confirmed-bar option to reduce repainting behavior. When enabled, signals are only generated after the candle closes. This helps avoid signals appearing and disappearing during live candle formation. Multi-timeframe data is also requested with lookahead disabled to support cleaner, non-repainting confirmation behavior. Multi-Timeframe Confirmation The script can analyze multiple timeframes at once: 5-minute 15-minute 1-hour 4-hour Daily Each timeframe is evaluated using EMA structure and RSI bias. The user can choose how many timeframes must agree before a long or short signal is allowed. Optional MTF score bonuses can be used to strengthen signals when higher-timeframe alignment is present. Trend & Momentum Filters The Reversal Engine includes several filters designed to improve signal quality: EMA Filter Uses fast, mid, and slow EMAs to evaluate trend structure. EMA Slope Filter Measures the slope of the fast EMA relative to ATR, helping confirm that price has enough directional strength. ADX Filter Filters out weak or low-trend environments. RSI & Stochastic Context Adds momentum and exhaustion information to the signal engine. Volume Filter Requires volume to be above a moving average threshold before signals are allowed. Vector Candles The script includes integrated Vector Candle logic. Vector candles highlight candles with unusually strong volume-spread force compared to recent average activity. The indicator separates: Regular bullish vector candles Regular bearish vector candles Extreme bullish vector candles Extreme bearish vector candles Normal bullish and bearish candles This helps traders identify high-effort candles, potential exhaustion, strong participation, or aggressive directional moves. VWAP Context The indicator includes multiple VWAP references: Daily VWAP Weekly VWAP Monthly VWAP 4H VWAP These levels provide clean institutional-style reference points for price reaction, trend context, mean reversion, and continuation setups. VWAP labels can be enabled to keep the chart easy to read. Market Structure The script includes optional structure visualization such as: BOS signals CHoCH signals Liquidity pivot markers These tools help traders understand where price may be breaking structure, shifting direction, or reacting around important swing areas. Pending Warnings Pending warnings act as entry previews. They appear when the setup is close to reaching the required score threshold and the important entry gates are already aligned. This can help traders prepare for a possible signal before the full confirmation appears. Pending warnings include their own cooldown to avoid excessive chart noise. Mutual Exclusion & Trade Lock To avoid conflicting signals, the script includes mutual exclusion logic and trade locking. This helps prevent rapid back-and-forth long and short signals during choppy conditions. The trade lock setting controls how long the engine waits before allowing a new trade direction. Targets, Stops & Smart Trail The script includes visual trade management tools: Stop-loss levels Up to three take-profit levels RR-based target calculation ATR-based stop buffer Optional smart trailing logic This gives traders a structured way to visualize risk and potential reward directly after a signal. Visual Features The script includes a complete visual overlay with: Buy and sell labels Pending warning labels Vector candle coloring Vector dots and extreme vector labels Multi-timeframe trend information VWAP levels BOS / CHoCH structure markers Liquidity pivots Smart trailing line Entry, stop, and take-profit levels Compact statistics panel Most visual elements can be enabled, disabled, or customized in the settings. Alerts The indicator is designed for alert-based workflows and can be used to monitor potential reversal or continuation setups. Typical alert use cases include: Long signal Short signal Pending long warning Pending short warning Structure shift VWAP reaction Vector candle event Trail or level-based management events How to Use Use the Reversal Engine as a confluence-based decision support tool. It is best used to identify moments where several independent conditions align in the same direction. Typical use cases include: Finding possible reversal entries after exhaustion Confirming continuation trades with trend and MTF alignment Filtering trades with EMA slope and volume confirmation Using VWAP levels as reaction or mean-reversion zones Identifying high-effort vector candles near key levels Managing trades visually with RR-based targets and ATR-based stops For stronger setups, look for signals that appear near important structure, VWAP levels, liquidity pivots, or after clear momentum exhaustion. Notes This script is an analytical overlay and does not execute trades automatically. Signals are based on configurable scoring and filter logic. No signal should be treated as guaranteed. The confirmed-bar option is designed to reduce intrabar repaint behavior, but all indicators using live market data can still change while a candle is open if confirmation is disabled. Multi-timeframe values depend on the selected chart, symbol, and timeframe settings. Disclaimer This indicator is for educational and analytical purposes only. It does not provide financial advice, trading recommendations, or guaranteed results. Always use proper risk management and perform your own analysis before entering any trade.
Pine Script® indicator
by TraxisLab
Decision Point Planner [AGPro Series]Decision Point Planner 🧠 Core Idea Is price sitting at a decision point that deserves review, patience, or rejection? 📌 Overview / What it does Decision Point Planner is a chart-first risk planning tool built to evaluate whether the current price area is meaningful enough to deserve attention. The script maps one active decision point from structure shelf, balance edge, or trend backbone context, then scores the area using location quality, reaction candle behavior, volume support, trend context, available room, and invalidation distance. The output is a 0-100 Decision Score, a clear next-action state, a decision zone, an invalidation shelf, a target-room corridor, compact labels, alerts, and a premium AGPro panel. It does not predict price direction, automate execution, or print direct buy/sell signals. 🎯 Purpose & Design Philosophy This script was built for traders who want to know whether the chart is actually at a meaningful decision area or simply moving through noise. Many tools show levels, zones, or signals in isolation. Decision Point Planner focuses on a narrower planning question: if price is near a decision reference, is the reaction strong enough, is risk still balanced, and is there enough room before the next obstacle? The design supports a patient planning mindset: identify the point, read the reaction, check room and invalidation, then decide what deserves attention. ⚡ Why This Script Is Different Most tools focus on plotting many support/resistance levels or marking every reaction. This script does NOT create a generic S/R map, order-block scanner, FVG map, or prediction engine. Instead, it selects one active decision reference and turns it into a planning workflow: Decision Score, Zone Type, Reaction State, Room/Risk, and Next Action. ⚙️ Methodology 1. Context Detection The script detects the active planning side automatically using trend context and range location, or the user can force Long Context or Short Context. 2. Reference Mapping It compares three decision references: the latest structure shelf, the active balance edge, and the trend backbone. The closest relevant reference becomes the active decision point. 3. Reaction Evaluation It evaluates whether price is touching or approaching the zone, whether the candle shows a valid reaction, whether volume supports the reaction, whether trend context agrees, and whether room and invalidation remain balanced. 4. Visual Output It displays a decision zone, invalidation shelf, target-room corridor, compact chart labels, alerts, and a clean AGPro panel. 🗺️ How to Read the Chart Decision Zone = the current area where price is being evaluated as a decision point. Invalidation Shelf = the reference beyond the zone that marks rejection in this rule set. Target-Room Corridor = the available forward room toward the nearest obstacle or a minimum room guide. Labels = compact attention markers showing ACTION, WAIT, PATIENCE, REJECTED, ROOM, or D POINT context. Colors = teal and pink show active directional context, amber shows caution, indigo shows wait/reaction context, and blue is reserved for the AGPro panel header. Panel = summarizes Decision Score, Zone Type, Reaction State, Room Risk, and Action. 🚦 Signals & States • ACTION REVIEW → the decision point has enough score, reaction, room, and risk quality to deserve closer review. • WAIT REACTION → price is near the decision point, but the reaction is still incomplete. • PATIENCE → the area is active but quality, room, or risk is not clean enough yet. • REJECTED → price crossed the invalidation shelf for the active decision point. • STAND BY → price is not close enough to the active decision reference. 🔔 Alerts Logic • Decision Point Action Review → triggers when the state enters ACTION REVIEW. • Decision Point Wait Reaction → triggers when price is near the point but reaction is incomplete. • Decision Point Patience → triggers when the active point requires patience or broader confirmation. • Decision Point Room Limited → triggers when the point is active but forward room is limited. • Decision Point Rejected → triggers when price crosses the active invalidation shelf. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic Decision quality improves when location, reaction candle behavior, volume support, trend context, target room, and invalidation distance align. The strongest read appears when price is near the decision zone, the reaction candle is efficient, volume is supportive, trend context agrees, room is open, and risk distance is balanced. 📊 When to Use • Around pullbacks where price is near a meaningful planning reference. • During breakout or continuation preparation when the next reaction matters. • Near range edges or balance transitions where patience is required. • When comparing whether a setup deserves review or should remain on watch. • On liquid markets where ATR, volume, and recent structure are meaningful. ⚠️ When NOT to Use • Extremely low-liquidity markets with unreliable volume and candles. • Highly noisy micro-timeframes where decision references change too frequently. • News-driven volatility spikes where ATR and candle ranges expand abnormally. • Charts where the user expects automatic buy/sell signals. • As a standalone reason to enter or exit a trade. 🎛️ Key Inputs • Planning Side → selects Auto, Long Context, or Short Context. • Decision Range Lookback → defines the planning range and target-room obstacle. • Structure Shelf Pivot Length → controls how strict the structure shelf reference is. • Decision Reach ATR → controls how close price must be to the active point before review. • Decision Zone Half-Width ATR → controls the vertical size of the decision zone. • Target Room and Invalidation Inputs → define room quality and balanced risk distance. • Visual Settings → control zones, shelves, corridor, labels, panel location, panel theme, and font sizes. 🖥️ Interface & Visual Design The interface is intentionally chart-first. The script uses one active decision zone, one invalidation shelf, and one target-room corridor instead of filling the chart with many competing zones. Labels are compact, offset away from candles, and controlled with cooldown and maximum-visible settings. The panel follows the AGPro publication layout with a single merged blue title row, adjustable location, adjustable theme, and adjustable font size. 🧪 Practical Usage Workflow 1. Read the panel state and Decision Score. 2. Check the active decision zone and zone type. 3. Evaluate the reaction label and candle behavior. 4. Compare target-room corridor and invalidation shelf. 5. Treat alerts as review markers and confirm the broader market context. 🔍 Interpretation Guidelines A higher Decision Score means the active decision point has stronger alignment inside the script's rule set. It does not mean price must move in the planned direction. ACTION REVIEW means the area deserves attention, not automatic execution. WAIT REACTION means the location may be important but the reaction is not complete. REJECTED means the active invalidation shelf was crossed in this rule set. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not auto trading. • Not guaranteed signals. • Not a buy/sell signal service. • Not a generic support/resistance zone map. • Not an order-block or FVG scanner. ⚠️ Limitations & Transparency Decision quality depends on the selected lookback, pivot length, ATR behavior, volume reliability, and timeframe. Different markets can produce different reference behavior. High volatility can widen invalidation distance. Low volatility can compress target room. Small timeframes may produce more frequent state changes. The script is rule-based and should be interpreted as an analytical planning layer inside broader market context. 🧠 Market Context Notes A decision point is useful only when it connects location, reaction, risk, and room. The same visual area can be weak if reaction is poor, volume is absent, target room is blocked, or invalidation is too tight or too wide. This script organizes those checks into one readable decision layer. 🧾 Use Case Examples When price pulls back toward the decision zone and the panel moves from WAIT REACTION to ACTION REVIEW, the area may deserve closer review. When price touches the zone but the panel shows Room Limited, the user can recognize that the nearby path is obstructed. When price crosses the invalidation shelf, the script marks the active decision point as rejected inside its rule set. 🧱 System Philosophy Decision Point Planner follows the AGPro decision-engine approach: Context first. Risk before reaction. Room before confidence. Attention markers instead of promises. 🔐 Non-Promise Statement No script can guarantee direction, continuation, reversal, or outcome. This tool provides structured chart context only. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own analysis, risk controls, position sizing, and trading decisions. This script does not provide financial advice, investment advice, or guaranteed trading outcomes. 📚 Educational Note Use the script to study how decision quality changes as price moves closer to or away from active planning references. The most useful reading comes from comparing the panel state with visible price reaction, room, and invalidation context.
Pine Script® indicator
by AGProLabs
Opening Drive Quality [AGPro Series]Opening Drive Quality 🧠 Core Idea Is the first directional drive of the session strong enough to plan around, or is it already losing execution quality? 📌 Overview / What it does Opening Drive Quality is a session execution planner that evaluates the first directional drive after the market opens. It studies the opening drive channel, early follow-through, pullback acceptance, risk-line integrity, and target-room structure in one clean decision framework. The script produces a 0-100 quality score, a clear next-action state, an opening drive channel, a pullback acceptance zone, an invalidation risk line, target guide, compact chart labels, alerts, and a premium AGPro panel. It does not predict price direction, automate trades, or mark every opening range breakout. Its purpose is to help traders evaluate whether the early session drive has enough structure, acceptance, and risk clarity to deserve attention. 🎯 Purpose & Design Philosophy The script was built for traders who need more than an opening range box or a simple breakout marker. The first session move often sets the tone, but the useful question is not only whether price moved. The useful question is whether that move produced clean follow-through, controllable risk, and a meaningful pullback area. Opening Drive Quality fills that gap by turning the opening move into a structured planning map. It supports traders who study session execution, intraday momentum, and pullback planning without relying on generic signals. The design philosophy is simple: evaluate the quality of the first drive, define the risk line, project the pullback acceptance zone, and make the next state readable at a glance. ⚡ Why This Script Is Different Most tools focus on opening range breakouts, session boxes, fixed kill zones, or failed-break signals. This script does NOT try to clone a generic ORB tool, a kill-zone session engine, or an opening range failure map. Instead, it focuses on the quality of the first directional drive itself. It asks whether the drive has real thrust, whether follow-through appears after the drive locks, whether price accepts a pullback zone, where the risk line sits, and what the next planning state should be. ⚙️ Methodology 1. Context Detection The script builds the opening drive from either a fixed session window or the first bars of a new day. This keeps the tool useful across regular-market assets and 24/7 markets. 2. Reference Mapping After the drive locks, the script maps the opening drive channel, pullback acceptance zone, invalidation risk line, and target-room guide. These references come from the opening drive structure, not from generic support and resistance pivots. 3. Reaction Evaluation The engine scores drive thrust, close location, range expansion, optional relative volume, follow-through distance, pullback behavior, and risk-line integrity. 4. Visual Output The chart shows the active drive channel, projected pullback zone, risk line, target guide, state labels, and a compact panel with the key planning reads. 🗺️ How to Read the Chart Opening Drive Channel = the locked first directional drive of the session. Pullback Acceptance Zone = the area where a controlled pullback can be evaluated after a valid drive. Risk Line = the invalidation line derived from the drive base, pullback zone, and ATR buffer. Target Guide = a projected target-room reference based on the opening drive range. Labels = compact markers for drive lock, follow-through, pullback acceptance, weak drive, risk break, and target check. Colors = teal for bullish drive context, pink for bearish drive context, amber for review states, and indigo for structural emphasis. Panel = the decision layer showing Drive Side, Follow-Through, Pullback Quality, Risk Line, and Action. 🚦 Signals & States • DRIVE Q → the opening drive has locked and received a 0-100 quality score. • FOLLOW Q → the drive has produced directional follow-through after locking. • PULLBACK ACCEPTED → price is reacting constructively inside the projected pullback acceptance zone. • WEAK DRIVE → follow-through has not developed inside the review window. • RISK BROKEN → the active drive has violated its invalidation line. • TARGET CHECK → price has reached the projected target-room guide. 🔔 Alerts Logic The script includes alerts for: • Opening Drive Quality Locked → a qualified opening drive has completed. • Drive Follow-Through → directional extension appears after the drive locks. • Pullback Accepted → price reacts inside the projected pullback acceptance zone. • Risk Line Broken → price violates the active drive risk line. • Target Guide Reached → price reaches the projected target-room guide. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic The context becomes stronger when opening drive thrust, close location, session volatility, relative volume, follow-through, and pullback acceptance align. The context becomes weaker when the opening drive locks with poor thrust, cannot extend, pulls back too deeply, or breaks the risk line. 📊 When to Use • Intraday session planning. • Opening-drive analysis after the first market push. • Markets where the opening session often defines early direction. • Pullback planning after a strong first drive. • Session review where risk line and target-room context matter. ⚠️ When NOT to Use • Very low-liquidity markets. • Extremely noisy opens with unstable spreads. • News-driven bars where the first drive is unusually distorted. • Assets where the selected opening session is not meaningful. • Higher timeframes where the opening drive window has no practical session context. 🎛️ Key Inputs • Opening Drive Mode → chooses first bars of day or a fixed session window. First Bars Of Day is the default so the chart loads with visible drive structure across more symbols. • Opening Drive Session → defines the drive-building window. • Tracking Session → defines when follow-through and pullback logic remains active. • Minimum Quality Threshold → controls when stronger planning labels appear. • Follow-Through ATR → defines the extension needed for follow-through confirmation. • Pullback Acceptance Depth → controls the projected pullback zone depth. • Risk Line Buffer ATR → adjusts the invalidation line beyond the drive structure. • Target Guide Multiple → controls the projected target-room guide. • Panel / Label Settings → control panel location, theme, font size, label size, visible label count, minimum label quality, label cooldown, and optional compact plot markers. 🖥️ Interface & Visual Design The interface is built around a clean AGPro panel and chart-first planning visuals. The panel uses a single merged blue header row with only the script name, then five practical rows: Drive Side, Follow-Through, Pullback Quality, Risk Line, and Action. The chart uses one opening drive channel, one pullback acceptance zone, one risk line, one target guide, and compact labels. The goal is a premium session-planning view without clutter. 🧪 Practical Usage Workflow 1. Read the panel after the opening drive locks. 2. Check whether the drive side and score show a valid planning context. 3. Watch follow-through quality after the drive locks. 4. Evaluate whether price pulls back into the acceptance zone constructively. 5. Use the risk line and target guide as planning references, not automatic decisions. 🔍 Interpretation Guidelines A strong score means the opening drive has better structure, cleaner close location, stronger volatility context, and better follow-through support. A pullback acceptance label means price is reacting inside the projected drive-based zone. It does not mean price must continue. A risk-line break means the original drive plan has lost structural integrity and should be reassessed. The most useful interpretation comes from combining the panel state with broader market context, liquidity, and timeframe alignment. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not an auto-trading system. • Not guaranteed signals. • Not a generic support and resistance mapper. • Not a clone of an ORB breakout tool. • Not a kill-zone timing dashboard. • Not an opening range failure scanner. ⚠️ Limitations & Transparency Timeframe selection affects the opening drive shape. A 5-minute chart and a 15-minute chart can produce different drive channels. Volatility changes can expand or compress the pullback zone and risk line. Session definitions matter. The selected opening window should match the asset being studied. High-impact news, abnormal spreads, and low liquidity can reduce the reliability of the opening drive map. 🧠 Market Context Notes Opening drives are most useful when liquidity is active and the first session push creates a clear directional reference. A clean drive does not guarantee continuation, but it can create a structured area for evaluating pullback acceptance and invalidation. The script intentionally keeps its references tied to the opening drive. It avoids pivot maps, order block language, broad S/R zones, and generic failed-break logic. 🧾 Use Case Examples When price locks a strong bullish opening drive, extends beyond the channel, and then pulls back into the acceptance zone without breaking the risk line, the panel may shift toward a constructive planning state. When price locks a drive but cannot create follow-through inside the review window, the script can mark the drive as weak and shift the action state toward bias reduction. When price violates the risk line, the original opening drive plan is no longer structurally intact inside this model. 🧱 System Philosophy Opening Drive Quality follows the AGPro decision-engine philosophy: a script should help the trader evaluate validity, strength, risk, target room, and next state instead of only printing another signal. The tool is designed to make the opening session easier to interpret through structured references and clean visual hierarchy. 🔐 Non-Promise Statement No script can provide certainty. No opening drive model can guarantee continuation, reversal, or profitability. This script provides structured context only. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own decisions. This script does not provide financial advice, investment advice, or guaranteed trading outcomes. 📚 Educational Note Use this script as an educational planning and visualization tool. The strongest use comes from reading the opening drive together with broader market structure, liquidity, volatility, and personal risk rules.
Pine Script® indicator
by AGProLabs
Volume Expansion Breakout Planner [AGPro Series]Volume Expansion Breakout Planner 🧠 Core Idea After a breakout, is volume expanding in a constructive path, or is the move losing participation and acceptance? 📌 Overview / What it does Volume Expansion Breakout Planner is a chart-first breakout planning tool built around post-breakout participation quality. Instead of judging only the breakout candle, the script maps the broken reference level, draws an acceptance band, monitors relative volume after the break, tracks whether price holds the path, and converts the full sequence into a 0-100 quality score. The output includes compact breakout path labels, volume expansion labels, hold labels, failed-volume labels, an invalidation rail, a room or review guide, and a clean AGPro decision panel. It does not predict price, automate entries, or issue trade commands. 🎯 Purpose & Design Philosophy This script was built to fill the gap between simple breakout markers and full trade-management tools. Many breakouts look strong on the first candle but quickly lose participation. Others start quietly and become stronger as post-break volume expands. This tool is designed for traders who want to evaluate that path with structure, not emotion. The mindset is planning-first: identify the breakout reference, evaluate volume expansion, check acceptance, respect invalidation, and decide whether the path deserves continued attention. ⚡ Why This Script Is Different Most breakout tools focus on the first break beyond a level. This script does NOT try to clone a standard breakout volume confirmation tool, a Darvas breakout system, a triangle breakout scanner, or a generic support/resistance map. Instead, it focuses on the post-break volume expansion path: what happens after the level breaks, whether volume remains constructive, whether price accepts the broken area, and whether the path becomes suspicious or failed. ⚙️ Methodology 1. Context Detection The script builds a prior price structure from a configurable lookback and identifies the upper and lower breakout references. 2. Reference Mapping When price closes beyond the reference by an ATR-normalized buffer, the script starts a breakout path and draws the broken level, acceptance band, invalidation rail, and a room or review guide. 3. Reaction Evaluation The model evaluates relative volume, candle efficiency, close location, breakout distance, trend alignment, range quality, post-break participation, progress, acceptance, and failure behavior. 4. Visual Output The chart displays compact path labels, volume expansion labels, accepted-path labels, failed-volume labels, and a premium AGPro panel summarizing the current decision state. 🗺️ How to Read the Chart Zones = the acceptance band around the broken level. Its text changes by state, such as BULL PATH REVIEW, ACCEPTED BULL PATH, or FAILED BEAR PATH. Labels = compact path state markers such as UP, DN, VOL+, HOLD, FAIL, WATCH UP, and WATCH DN. Label scores can be enabled from settings if the user wants more detail. Colors = teal for constructive bullish paths, pink for constructive bearish paths, yellow for watch or caution states, indigo for room or review guide emphasis, and muted gray for expired paths. Panel = the current breakout side, volume expansion state, acceptance state, quality score, and next action. 🚦 Signals & States • UP → a bullish breakout path has started. • DN → a bearish breakout path has started. • VOL+ → post-break volume is expanding with directional follow-through. • HOLD → the path held beyond the acceptance band with constructive volume. • FAIL → the path returned into weak-volume or invalidation conditions. • WATCH UP / WATCH DN → optional approach labels when price is near a breakout reference while relative volume is building. 🔔 Alerts Logic Alerts trigger when a high-quality bullish or bearish volume expansion path starts, when post-break volume expands, when the path becomes accepted, or when failed-volume conditions appear. These alerts are attention markers for chart review. They are not trade instructions. 🧩 Confluence Logic The strongest readings usually occur when the breakout closes cleanly beyond the reference, relative volume expands above baseline, candle structure is efficient, trend alignment supports the side, and price later accepts the broken area. When these conditions align, the quality score improves and the next-action state becomes more constructive. 📊 When to Use • Breakout continuation review • Range exits where volume quality matters • Post-break acceptance monitoring • Breakouts that need a clear invalidation reference • Multi-symbol review where traders need fast path-quality comparison ⚠️ When NOT to Use • Low-liquidity symbols with unreliable volume • Markets with irregular session volume or distorted feeds • Extremely choppy periods where every break returns inside the prior structure • Events driven by abnormal news volatility where technical volume baselines become less stable 🎛️ Key Inputs • Breakout Lookback → controls the prior structure used for breakout references. • Break Buffer ATR → defines how far price must close beyond the level. • Volume Baseline Length → controls the relative volume baseline. • Expansion RVOL Threshold → defines the required volume expansion for strong pulses. • Minimum Planner Score → controls how selective the main path states are. • Acceptance Band ATR → controls the decision zone around the broken level. • Invalidation Rail ATR → controls the structural failure reference. • Panel / Label Settings → control location, theme, font size, label scores, optional watch labels, and label density. 🖥️ Interface & Visual Design The interface is built for fast chart reading. The acceptance band is the main visual anchor. The breakout line, invalidation rail, and room or review guide create a compact planning map without filling the chart with generic zones. Labels are short, shifted slightly away from the candle, and capped by user settings. The AGPro panel follows the publication standard with a single merged blue header row containing only the script name. 🧪 Practical Usage Workflow 1. Read the panel to see whether a breakout path is active. 2. Check the acceptance band and broken level. 3. Evaluate whether volume is expanding or fading. 4. Watch for ACCEPTED or FAILED VOL states. 5. Use the invalidation rail and room or review guide as planning references within broader market context. 🔍 Interpretation Guidelines Read the score as a structured quality model, not as certainty. A higher score means the path has cleaner participation, stronger candle structure, better close quality, better trend alignment, and stronger acceptance behavior according to the script's rules. A lower score means the path is weaker, less accepted, or more vulnerable to failed-volume behavior. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a complete trading system • Not a generic buy/sell indicator ⚠️ Limitations & Transparency Volume quality depends on the reliability of the TradingView volume feed for the selected symbol. Different timeframes can produce different breakout references and acceptance behavior. High-volatility news periods, low-liquidity markets, and irregular session activity can reduce the usefulness of relative volume baselines. The script is rule-based and should be interpreted alongside broader context. 🧠 Market Context Notes Volume expansion is most useful when it is connected to structure. The broken level matters because it gives the move a reference. The acceptance band matters because it shows whether the market is holding that reference. The invalidation rail matters because it defines when the path has lost structural quality. 🧾 Use Case Examples When price breaks above a prior range with strong RVOL and later holds the acceptance band, the path may remain constructive. When price breaks below a range but volume fades and price returns above the broken reference, the path may become suspicious or failed. When price approaches a reference with building volume but no confirmed break, VOL WATCH keeps the trader aware without turning the tool into a signal board. 🧱 System Philosophy The script is part of the AGPro planner-style workflow: show the reference, score the context, define invalidation, monitor acceptance, and guide the next review step. 🔐 Non-Promise Statement No script can guarantee continuation, reversal, or outcome certainty. This tool organizes breakout-volume context so users can evaluate the chart more clearly. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own decisions, risk management, and market interpretation. This script is provided for educational and analytical use only and does not provide financial advice. 📚 Educational Note Use the script to study how post-breakout volume behaves after price leaves a prior structure. The most useful insights often come from comparing accepted paths against failed-volume paths over many examples.
Pine Script® indicator
by AGProLabs
Structural Sequence Pressure [JOAT]Structural Sequence Pressure Introduction Structural Sequence Pressure is a market-structure breakout indicator built around the idea that not all pivot levels carry the same weight. A level formed after one isolated pivot is ordinary. A level formed after repeated higher lows or lower highs represents structural persistence. This script quantifies that persistence, plots the resulting support and resistance levels, and highlights when those levels break. The indicator is designed for traders who want clean structure without overfitting. It tracks sequence depth, manages active levels, and focuses attention on breaks that matter more because the market spent time constructing them. Why This Indicator Exists Sequence-Based Structure: Measures how many pivots formed in the same directional progression Level Significance Filter: Helps distinguish weak levels from structurally reinforced ones Live Break Detection: Signals when meaningful support or resistance gives way Clutter Control: Caps active lines and labels to keep charts readable Statistical Feedback: Shows the most recent sequence pressure behavior directly in the dashboard Core Components Explained 1. Confirmed Pivot Detection pivHigh = ta.pivothigh(high, leftBars, rightBars) pivLow = ta.pivotlow(low, leftBars, rightBars) The script only reacts to confirmed pivots. This means levels are built from validated swing points rather than from intrabar noise, which keeps the tool stable and non-repainting after pivot confirmation. 2. Upward and Downward Sequence Counting When a new pivot low forms higher than the previous pivot low, the upward sequence count increases. When a new pivot high forms lower than the previous pivot high, the downward sequence count increases. If the relationship fails, the sequence resets to one. Higher lows: Build upward structural pressure Lower highs: Build downward structural pressure Longer sequences: Represent stronger structural continuity 3. Active Level Engine Every confirmed pivot creates a horizontal level that extends right. Support levels come from pivot lows. Resistance levels come from pivot highs. Each level stores: Its price Whether it is support or resistance Its sequence depth Its creation time Levels are trimmed by age and capped by quantity so the chart stays clean. 4. Break Logic brokeSupport = close < supportLevel brokeResistance = close > resistanceLevel Only levels with sequence depth greater than or equal to the selected threshold can trigger signals. This creates a cleaner breakout map that emphasizes structurally meaningful failures and expansions. 5. Chart Hygiene Controls The script stores and prunes pivot labels so they do not accumulate indefinitely. Broken or expired levels are removed from active management, and broken levels can optionally be deleted immediately for a cleaner chart. Visual Elements Support Lines: Teal dashed levels extending from higher-low pivots Resistance Lines: Red dashed levels extending from lower-high pivots Pivot Labels: Compact U/D sequence tags showing progression depth Break Markers: Triangles on bullish resistance breaks and bearish support breaks Dashboard: Up sequence, down sequence, total breaks, last break depths, and active level count Input Parameters Pivot Left / Right Bars: Confirmation strength for structural swings Minimum Sequence: Required sequence depth before a break can trigger Max Active Levels: Hard cap for line management and chart cleanliness Max Level Age: Removes stale structure from consideration Delete Broken Levels: Optional cleanup for a more minimal chart How to Use This Indicator Step 1: Identify whether the market is building higher lows or lower highs. Step 2: Focus on levels with deeper sequence counts. Step 3: Treat bullish signals as upside breaks of resistance sequences. Step 4: Treat bearish signals as downside breaks of support sequences. Step 5: Use the level count and recent break depths to judge whether structure is compressing or resolving. Best Practices Use larger pivot settings on volatile instruments to reduce noise Increase minimum sequence length when markets are choppy Pair with trend or participation tools to separate continuation from exhaustion Respect old levels less than fresh ones unless they were built with deep sequence pressure Use the dashboard to calibrate structure sensitivity instrument by instrument Indicator Limitations Pivot-based tools confirm after the fact by design Sequence strength measures persistence, not certainty Very low pivot settings can create too many structural levels Very high pivot settings can delay signals Breakouts can still fail, especially in range-bound conditions Technical Implementation Built in Pine Script v6 using: Confirmed pivot detection Directional sequence counting Array-managed line storage Label retention caps for chart cleanliness Age-based level cleanup Non-repainting break logic on confirmed bars Originality Statement This indicator is original in its focus on sequence depth as the source of structural weighting. Many support and resistance tools draw levels; this one grades their importance by the persistence of the swing process that created them, then filters breakout logic through that structural pressure. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Structural breaks can fail, reverse, or whipsaw. Always use independent analysis, stops, and appropriate risk management. -Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
Vector Confluence OscillatorThe Vector Confluence Oscillator is a high-precision market terminal designed to identify the exact intersection of Price Deviation and Momentum Exhaustion. Unlike standard oscillators that only track velocity, the Vector Confluence system maps price action against its statistical mean, allowing traders to see when the market is "stretched" both in terms of value and momentum. Core Functionality This indicator operates on two primary data vectors to find high-probability reversal zones: Vector A: Statistical Price Deviation The background turns Red (Overvalued) or Blue (Undervalued) based on Standard Deviation bands. This highlights when price has moved too far, too fast from its average. Vector B: Momentum Velocity (RSI) The internal "Momentum Cloud" and dynamic oscillator line track the internal strength of the move. When the cloud flips from Green (Bullish) to Red (Bearish), it signals a shift in the trend's power. Key Features Segmented Grid Interface: Sharp vertical dividers separate each deviation bar, allowing you to count the "bars of exhaustion" at a glance. Dynamic Trend-Line: The oscillator line itself inherits colors from the trend, providing instant visual feedback on momentum direction. Micro-Peak Dots: Customizable exhaustion dots appear when momentum reaches extreme peaks (Overbought/Oversold), serving as your final confirmation for a reversal. Fully Customizable Aesthetic: Every color, transparency, and dot size (from "Tiny" to "Big") can be adjusted to fit your specific UI or dark-mode setup.
Pine Script® indicator
by rafstar_kaczmarek
TraxisLab - Bitcoin Market EdgeTraxisLab Bitcoin Market Edge is a Bitcoin-focused confluence indicator designed to combine trend, momentum, volume flow, VWAP, orderblocks, liquidity grabs, multi-timeframe bias, and structured risk levels into one clean trading overlay. The script is built specifically as a decision-support framework for BTC traders who want a compact market edge model directly on the chart. Core Concept Bitcoin Market Edge uses a weighted scoring matrix to compare bullish and bearish conditions. Instead of triggering entries from one isolated signal, the indicator evaluates several market components at the same time: Volatility-adjusted EMA trend Trend-adaptive RSI OBV-based volume flow Daily VWAP position and reclaim logic Orderblock interaction Liquidity grab detection Break of structure Multi-timeframe bias Strong-volume confirmation A long or short signal is only displayed when the score reaches the selected threshold, the opposite side is weaker by the required score gap, and cooldown rules are satisfied. Signal Modes The script includes three operating modes: Aggressive More responsive signals with a lower score threshold. Standard Balanced signal generation for general use. Conservative Stricter filtering with fewer but more selective signals. A manual score override is available for users who want to define their own required score threshold. Volatility-Adjusted EMAs The indicator uses three EMAs: Fast EMA Mid EMA Slow EMA When volatility adjustment is enabled, EMA speed adapts to current ATR conditions. In higher volatility, the EMAs can respond faster, while calmer conditions keep the trend model smoother. The trend engine evaluates EMA alignment and EMA slope to classify the market as bullish, bearish, or neutral. Trend-Adaptive RSI The RSI logic adapts to the current trend environment. In bullish conditions, RSI is interpreted differently than in bearish or neutral conditions. This helps separate trend continuation momentum from potential exhaustion or reversal behavior. The script can detect: Bullish RSI continuation Bearish RSI continuation Extreme long conditions Extreme short conditions RSI slope shifts Volume Flow, OBV & VWAP Bitcoin Market Edge includes a volume-flow layer based on smoothed OBV and Daily VWAP. This section helps identify whether volume is supporting the current price direction. It evaluates: OBV direction OBV trend vs slower OBV average Strong volume compared to volume moving average Price position above or below Daily VWAP VWAP reclaim events VWAP proximity This makes VWAP and volume flow an important part of the score model. Orderblocks & Liquidity Grabs The script detects basic bullish and bearish orderblocks after break-of-structure events. It can display active orderblock zones directly on the chart and track when price trades back into them. It also detects liquidity grabs: Bullish liquidity grab below a previous pivot low Bearish liquidity grab above a previous pivot high These events are included in the confluence score and can also be displayed as compact “LG” markers. Multi-Timeframe Bias Dashboard The indicator checks up to four user-defined higher or lower timeframes. Each timeframe is scored using: EMA structure Price position relative to the slow EMA RSI bias The dashboard displays the bias for each selected timeframe as bullish, bearish, or neutral. This helps traders quickly see whether the current chart aligns with broader market direction. Confluence Scoring Matrix The scoring model compares long and short conditions across five categories: Trend RSI / momentum Volume flow and VWAP Orderblocks, BOS, and liquidity grabs Multi-timeframe bias Strong volume can add an additional score boost to the dominant side. Signals require: Score above the selected threshold Minimum long/short score gap Cooldown confirmation Confirmed bar if enabled No active same-direction signal conflict This helps reduce weak or conflicting signals. Risk Targets When a signal appears, the script calculates visual trade levels: Entry Stop Loss TP1 TP2 TP3 The stop is based on ATR, while take-profit levels are based on configurable risk-reward multiples. These levels are drawn directly on the chart for the active setup. Visual Features The indicator includes a clean visual layout with: Long and short signal labels Tooltip details with score, entry, SL, TP levels, and MTF count Volatility-adjusted EMAs Daily VWAP EMA and VWAP right-side labels Bullish and bearish orderblock boxes Liquidity grab markers Active entry, stop, and target lines Multi-timeframe dashboard Most visuals can be enabled, disabled, or customized in the settings. Alerts The script includes alert conditions for: Long entry Short entry Bullish BOS Bearish BOS Bullish liquidity grab Bearish liquidity grab Price entering bullish orderblock Price entering bearish orderblock These alerts can be used to monitor BTC setups without constantly watching the chart. How to Use Use Bitcoin Market Edge as a BTC-focused confluence and risk-mapping tool. Typical use cases include: Finding long or short opportunities when multiple BTC-specific conditions align Confirming trend direction with volatility-adjusted EMAs Checking volume support through OBV and VWAP Watching for liquidity grabs around pivots Tracking orderblock reactions after BOS events Comparing current chart direction with multi-timeframe bias Mapping risk and reward levels after a signal For stronger setups, look for signals that align with higher-timeframe bias, strong volume, VWAP direction, and nearby orderblock or liquidity-grab context. Notes This script is optimized for Bitcoin market analysis but can also be applied to other liquid crypto markets. The quality of signals may vary depending on the selected exchange, timeframe, volume data, and market conditions. Orderblocks and liquidity grabs are simplified structural models and should be used as context rather than guaranteed reversal zones. The indicator does not execute trades automatically. Disclaimer This indicator is for educational and analytical purposes only. It does not provide financial advice, trading recommendations, or guaranteed results. Always use proper risk management and perform your own analysis before entering any trade.
Pine Script® indicator
by TraxisLab
Session Range Expansion Planner [AGPro Series]Session Range Expansion Planner 🧠 Core Idea Is the session expanding from balance into a valid range extension, or is the break still too weak to trust as context? 📌 Overview / What it does Session Range Expansion Planner is a 1H-focused intraday execution-readiness tool built around one clear workflow: define the early-session balance, track expansion beyond that range, and score whether the move has enough acceptance, volume support, volatility fit, and target room to deserve attention. The script produces a session range box, accepted target-room bands, acceptance/rejection context, alerts, and a premium AGPro panel with a 0-100 planner score. The default visual preset is optimized for 1H and lower charts. Higher intraday charts such as 4H are intentionally kept clean by default. It does not predict the next candle, automate entries, or issue buy/sell commands. It organizes session behavior into a structured decision layer so the user can evaluate the setup within their own plan. 🎯 Purpose & Design Philosophy This script was built to fill the gap between simple session boxes and generic breakout indicators. Most tools show where the session range is. Fewer tools explain whether the break from that range is actually being accepted, whether participation supports it, and whether there is usable room beyond the range. Session Range Expansion Planner supports a planning mindset: define balance first, wait for expansion, check acceptance, evaluate room, then decide whether the context is worth further review. ⚡ Why This Script Is Different Most session tools focus on marking opens, coloring sessions, or printing a breakout label as soon as price crosses a high or low. This script does NOT act as a generic session high/low map, generic support/resistance tool, or broad session reaction scanner. Instead, it treats the first part of the session as a balance structure and asks whether the later expansion has enough quality to become actionable context. The decision layer is built around acceptance bars, volume support, ATR regime, obstacle distance, and target-room quality. ⚙️ Methodology 1. Context Detection The script reads the selected intraday session and builds an initial balance range from the first user-defined number of bars. 2. Reference Mapping The session balance high and low become the only active expansion boundaries. The tool does not use PDH, PDL, weekly open, order blocks, FVGs, or generic swing zones. 3. Reaction Evaluation When price breaks beyond the balance range, the engine measures acceptance closes, volume support, ATR regime quality, break distance, and nearby obstacle room. 4. Visual Output The script displays a centered session range label, directional expansion labels, target-room band, acceptance/rejection labels, alerts, and a premium panel with score and next-action state. 🗺️ How to Read the Chart Session Range Box = the early-session balance area. Expansion Labels = the side where price first expands beyond the balance high or low. Target-Room Band = the projected room beyond the broken boundary after expansion has been accepted, scaled by session range or ATR. Acceptance Labels = confirmation that price has sustained closes beyond the range for the configured number of bars. Rejection Labels = warning that price has failed back through the broken boundary. Colors: • Teal = upside expansion context • Pink = downside expansion context • Amber = neutral, warning, or rejection context • Indigo = AGPro visual accent and target-room support Panel = the decision cockpit showing planner score, session range, expansion side, acceptance, room score, and next action. 🚦 Signals & States • Range Set → the initial balance window has completed. • Expansion Up → price expanded above the session balance high. • Expansion Down → price expanded below the session balance low. • Accepted → the expansion held beyond the range for the required acceptance bars. • Rejection Risk → price failed back through the broken boundary. • Room Check Reached → price reached the projected target-room area. 🔔 Alerts Logic Alerts trigger when: • Upside range expansion is detected • Downside range expansion is detected • Expansion becomes accepted • Rejection risk appears after expansion Alerts are attention markers. They are not trade instructions and should be interpreted together with broader market context. 🧩 Confluence Logic The strongest context appears when expansion direction, sustained acceptance, volume support, balanced ATR regime, and clean target room align at the same time. When those conditions stack together, the planner score rises and the panel moves toward a review-ready state. 📊 When to Use • 1H intraday charts with clear session behavior • Opening balance or early-session range workflows • Breakout quality review • Volatility expansion planning • Session continuation evaluation The script is most useful when a trader wants to know whether a session range break is actually being accepted, not just whether a line was crossed. ⚠️ When NOT to Use • Very low-liquidity symbols • Extremely noisy micro timeframes • Markets with unreliable volume • Sessions with irregular trading hours • News-driven candles where range expansion is disorderly In weak conditions, reduce sensitivity or require stricter acceptance. 🎛️ Key Inputs • Session Timezone → defines how the selected session is interpreted. • Expansion Session → sets the active intraday window. The default full-day session is designed to work cleanly on crypto and other 24-hour symbols. • Visual Timeframe Preset → controls which intraday timeframes show chart objects. The default is 1H and lower because 4H session expansion charts can become too compressed. • Balance Window Bars → controls how many early-session bars define the range. • Acceptance Bars → defines how much sustained closing behavior is required. • Sensitivity → adjusts how fast the script recognizes expansion. • Confirmation Mode → controls wick, close, or strict acceptance confirmation. • Minimum Planner Score → sets the score threshold for review-ready context. • ATR Length → controls volatility normalization and label spacing. • Obstacle Lookback → estimates nearby structure that may reduce room quality. • Target Room Multiplier → controls the projected target-room distance. • Visual Settings → control range boxes, centered range label limit, rails, accepted target-room band, minimum visual score, optional expansion labels, optional room-check labels, optional range-set labels, label size, and object limits. • Panel Settings → control panel visibility, location, theme, and font size. 🖥️ Interface & Visual Design The interface is chart-first. The range box and target-room band carry the main visual story, while labels explain state transitions only when meaningful events occur. The panel is intentionally compact. It gives a fast read of expansion quality without forcing the user to decode many separate plots. The first panel row follows the AGPro standard: a single merged blue header row with only the script name. 🧪 Practical Usage Workflow 1. Apply the script to an intraday chart. 2. Confirm the correct session and timezone. 3. Let the initial balance window complete. 4. Watch for expansion beyond the balance high or low. 5. Check whether acceptance bars confirm sustained behavior. 6. Read the planner score and room score. 7. Use the next-action state as context for your own execution plan. 🔍 Interpretation Guidelines A clean expansion is not just a break beyond the range. It should show acceptance, participation, reasonable volatility, and enough room before nearby obstruction. Low scores usually mean the break is early, unsupported, too noisy, too extended, or too close to an obstacle. The best use is comparative: review which sessions and symbols repeatedly produce clean accepted expansions versus weak false breaks. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a buy/sell command system • Not a generic support/resistance map • Not an order block, FVG, or liquidity sweep scanner ⚠️ Limitations & Transparency Session behavior can vary across assets, timeframes, exchanges, and trading hours. ATR regime and volume support are rule-based approximations, not certainty models. On very low timeframes, labels may appear more frequently. On higher intraday timeframes, fewer but more meaningful events are expected. Markets can expand cleanly and still reverse later. The tool measures context quality, not future certainty. 🧠 Market Context Notes Session range expansion often becomes more meaningful when it is read together with broader trend, liquidity, volatility, and higher-timeframe structure. The script deliberately stays focused on session balance and expansion quality. Users can combine it with their own broader framework without duplicating other AGPro tools. 🧾 Use Case Examples When price breaks above the session range, holds above the balance high for the required acceptance bars, and room score remains strong, the panel may shift into review-ready continuation context. When price breaks the range but quickly closes back inside the balance, the script marks rejection risk and the panel moves away from continuation review. 🧱 System Philosophy AGPro tools are built to help traders organize context into clear decision layers. Session Range Expansion Planner follows that philosophy by turning a common intraday event into a structured planning process: balance, expansion, acceptance, room, action. 🔐 Non-Promise Statement No script can guarantee future price movement. The score is a structured context model, not a certainty model. 📉 Risk Disclosure Trading involves risk. Market conditions can change quickly, and historical session behavior does not guarantee future outcomes. Users are responsible for their own decisions, risk management, and position sizing. This script is provided for educational and analytical use only and does not provide financial advice. 📚 Educational Note Use the script to study how different markets expand from early-session balance. The most valuable insight is not a single label, but the repeated relationship between range quality, acceptance, room, and market context.
Pine Script® indicator
by AGProLabs
Impulse Regime Engine [JOAT]Impulse Regime Engine Introduction Impulse Regime Engine is a hybrid breakout-and-trend indicator designed to detect when participation expands, when that expansion compresses into a tradeable box, and when price finally resolves that box with directional intent. It combines a volume regime engine with an RSI-projected price trend framework, creating a clean overlay built for timing impulsive releases without sacrificing directional context. This indicator is especially useful for traders who like breakout structures but do not want to trade every range break blindly. The regime box defines the event. The projected trend framework defines the context. Why This Indicator Exists Participation Regime Classification: Distinguishes low-quality price movement from meaningful volume expansion Lifecycle-Based Box Engine: Separates the setup into building, armed, and resolved states Projected Trend Overlay: Maps RSI into price space for contextual trend direction Strength-Based Candle Coloring: Visualizes conviction without overloading the chart Active Risk Map: Adds optional stop and target staging after valid breaks Core Components Explained 1. Volume Regime Engine volRatio = shortVolMA / longVolMA Volume is classified into Low, Normal, High, and Extreme states by comparing short-term participation to a longer-term baseline. Only elevated regimes are allowed to build a valid impulse box. 2. Regime Box Lifecycle Building: While elevated volume persists, the box expands to contain the active burst Armed: Once the burst cools, the box freezes and waits for release Resolved: A confirmed close beyond the boundary triggers the breakout event and resets the cycle The script now includes a cooldown between resolved boxes so repeated high-volume churn does not keep repainting fresh structures on every minor burst. 3. RSI Projection Framework projected = priceLow + smoothedRsi * priceRange / 100.0 avgLine = ta.ema(projected, smoothLen) Instead of reading RSI only as a sub-pane oscillator, the script converts RSI into projected price space. This produces a trend reference line directly on the chart. 4. Dynamic Tolerance Bands tolerance = avgBody * toleranceMultiplier marginUp = avgLine + tolerance marginDn = avgLine - tolerance Price above the upper band confirms bullish projected trend. Price below the lower band confirms bearish projected trend. This acts like a directional bias filter around the projection basis. 5. Breakout Risk Framework When price resolves the armed box, the script can draw one stop and three profit levels using either ATR-derived or percentage-derived distance. The lines auto-expire so old trade maps do not crowd the chart. Visual Elements Regime Box: Semi-transparent box during build and armed phases Projection Basis: Gold-accent projected trend line Tolerance Bands: Bull and bear projection boundaries Gradient Candles: Optional candle coloring by directional strength Breakout Markers: Compact IRE triangles on confirmed release TP/SL Lines: Optional risk staging while the active breakout remains valid Dashboard: Volume regime, ratio, bias, box state, signal state, RSI, and strength Input Parameters Regime Engine: Short / Long Volume MA Low / Normal / High thresholds Max build bars Max armed bars New box cooldown bars Trend Projection: RSI length and smoothing Projection range bars Projection EMA Tolerance multiplier Strength lookback Risk Framework: ATR period ATR stop multiplier TP1 / TP2 / TP3 risk-reward ratios TP/SL maximum life How to Use This Indicator Step 1: Wait for elevated participation to build the impulse box. Step 2: Let the box transition into the armed state. Step 3: Read whether projected trend bias agrees with the likely breakout direction. Step 4: Use confirmed breaks, not intrabar pokes, as the actual event trigger. Step 5: Manage the trade against the active risk map or your own execution rules. Best Practices Use on instruments with reliable participation data Prefer breakouts aligned with the projected trend state Treat extreme volume bursts as high-opportunity but also high-volatility events Use the cooldown to avoid overreacting in noisy compression cycles Disable extra visuals if you want a cleaner execution chart Indicator Limitations Volume regime logic depends on the quality of the feed Not every armed box will produce a sustained move Projected RSI trend is a contextual guide, not a guarantee Breakouts can fail or reverse quickly in low liquidity Repeated tests of the same area reduce signal quality Technical Implementation Built in Pine Script v6 using: Short-vs-long volume regime classification Stateful box lifecycle logic RSI-to-price projection Body-based tolerance bands Strength-gradient candle coloring Optional ATR or percent risk mapping Confirmed-bar breakout and trend-shift alerts Originality Statement This indicator is original in the way it combines regime participation, lifecycle breakout structure, and projected momentum context into one overlay. Its edge is not just detecting expansion, but framing when expansion is worth respecting. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Breakout trading involves risk, including false breaks and fast reversals. Always manage risk carefully and confirm signals with your own process. -Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
Value Area Rejection StrategyThis strategy identifies an equilibrium zone using a rolling average price range and looks for rejection when price moves into that zone but fails to hold inside it. The idea is simple: Markets often rotate around fair value If price enters value and quickly rejects, it can signal directional intent. The strategy trades the move away from that rejected value area How It Works 1. Build the Value Area A rolling average price forms the center of value. An ATR-based band creates: Upper Value Boundary Lower Value Boundary 2. Detect Rejection A trade is considered when: Bullish Rejection Price dips into/below lower value area Closes back above the lower boundary Bearish Rejection Price moves into/above upper value area Closes back below the upper boundary 3. Risk Management ATR-based stop-loss and take-profit: Adaptive to market volatility Fixed risk-to-reward structure Logic Summary A rolling SMA acts as the value midpoint ATR bands create upper/lower value boundaries Long entries occur when price rejects below value and closes back inside Short entries occur when price rejects above value and closes back inside Risk Handling ATR-based stop-loss adapts to volatility Fixed risk/reward target keeps trade structure consistent Best Use Cases Rotational markets Pullback environments Value-to-imbalance transitions Notes This is a simplified value-area model intended for testing and educational use. It approximates equilibrium behavior and is not a replacement for full market profile or exchange volume profile tools.
Pine Script® strategy
by AIScripts
Breakout Failure Recovery [AGPro Series]Breakout Failure Recovery 🧠 Core Idea After a failed breakout, is price recovering through the reclaim level or confirming the failure? 📌 Overview / What it does Breakout Failure Recovery is a chart-first failed-breakout lifecycle planner built to evaluate what happens after price probes outside a recent range and closes back inside. The script maps a failure box, reclaim trigger, risk shelf, recovery/rejection labels, and a compact AGPro panel. It converts close-back-inside behavior, reclaim speed, retest response, volume behavior, and time decay into a 0-100 Recovery Score with a clear next-action state. It does not predict the next move, automate execution, or act as a generic failed-break signal. Its purpose is to organize the post-failure decision context. 🎯 Purpose & Design Philosophy This script was built for traders who do not want to treat every failed breakout the same way. Some failed breaks recover quickly through the original breakout level. Others reject the boundary, lose time, and confirm that the attempt has failed. This tool focuses on that decision window. The design supports a planner mindset: identify the failure, measure the reclaim attempt, locate the risk shelf, and decide whether the context deserves review or should be downgraded. ⚡ Why This Script Is Different Most tools mark a failed break as a single event. This script does NOT stop at the failed-break label, does not clone a Swing Failure Pattern engine, and does not become a generic breakout-failure signal board. Instead, it evaluates the recovery path after the failure. The main output is a recovery state: Recovery Active, Recovery Watch, Failure Confirmed, Reclaim Pending, Window Decaying, or No Active Failure. ⚙️ Methodology 1. Context Detection The script builds a recent range from prior bars and checks whether price probes beyond the upper or lower boundary before closing back inside. 2. Reference Mapping When a failed break appears, it maps the failure box, reclaim trigger, and risk shelf around the failed boundary. 3. Reaction Evaluation The model scores close-back-inside quality, reclaim speed, retest response, volume behavior, and time decay. 4. Visual Output The result is shown through centered failure-box text, a centered risk-shelf label, reclaim/reject labels, alert conditions, and a clean AGPro planning panel. 🗺️ How to Read the Chart Failure Box = the failed-break excursion outside the recent range. Reclaim Trigger = the level that shows the original breakout attempt is trying to recover. Risk Shelf = the boundary zone where retest response should be reviewed. Labels = compact markers for failed break, reclaim, reject, decay, and watch context. Colors = teal highlights constructive recovery context, pink highlights failure or rejection pressure, amber highlights shelf review, and indigo highlights watch states. Panel = summarizes Failure State, Recovery Score, Reclaim Level, Risk Zone, and Action. 🚦 Signals & States • Failed Breakout Detected → price probed outside the recent range and closed back inside. • Recovery Watch → recovery conditions are developing, but reclaim confirmation is incomplete. • Recovery Active → reclaim behavior and the Recovery Score have reached stronger review context. • Failure Confirmed → price rejects the failed boundary or moves deeper back into the range. • Reclaim Pending → an active failure exists, but recovery conditions are not strong enough yet. • Window Decaying → the failed-break context is getting old and should carry less weight. 🔔 Alerts Logic Alerts trigger when a failed breakout is detected, when Recovery Watch appears, when Recovery Active appears, or when Failure Confirmed appears. Alerts are attention markers only. They are not trade instructions, entry commands, exit commands, or automated strategy rules. 🧩 Confluence Logic The strongest recovery context appears when price closes back inside the range, reclaims the failed boundary quickly, shows a constructive retest response, receives supportive volume, and does not lose too much time after the failed break. When these components weaken, the script can shift toward Reclaim Pending, Window Decaying, or Failure Confirmed. 📊 When to Use • After a breakout attempt closes back inside a recent range • During range-bound markets with frequent boundary tests • Around failed expansion attempts where reclaim quality matters • When deciding whether a failed breakout deserves continued monitoring • On liquid symbols where range, volume, and candle behavior are readable ⚠️ When NOT to Use • Very low-liquidity symbols with unstable candles • Extremely noisy micro-timeframes • News-driven spikes where levels lose structure quickly • Markets with unreliable volume data • Situations where the user expects a direct signal-only tool 🎛️ Key Inputs • Failure Range Lookback → controls the recent range used to detect failed breaks. • Failure Probe ATR → defines how far price must probe beyond the range boundary. • Recovery Window Bars → controls how long the failed-break recovery window stays relevant. • Retest / Shelf ATR → controls risk shelf thickness and boundary response tolerance. • Recovery Active Threshold → sets the minimum score for the strongest recovery state. • Label and Panel Font Size → controls chart labels, centered zone text, and panel readability. 🖥️ Interface & Visual Design The interface is designed to stay chart-first. The failure box gives the visual story. The reclaim trigger and risk shelf define the practical review frame. Labels remain compact and controlled so the chart stays active without becoming crowded. The AGPro panel uses a merged blue title row and a compact decision layout for fast reading. 🧪 Practical Usage Workflow 1. Read the panel state and Recovery Score. 2. Check the failure box and failed boundary. 3. Compare price behavior against the reclaim trigger. 4. Review the risk shelf and rejection response. 5. Treat alerts as attention markers, then evaluate broader market context. 🔍 Interpretation Guidelines Think in terms of failed-break lifecycle, not prediction. A stronger Recovery Score means the failed breakout is attempting to reclaim quickly with better response and participation. A weaker score means the failure may be aging, rejecting, or losing structural quality. Failure Confirmed does not mean the market must continue in one direction. It means the failed-break attempt is not recovering cleanly within the current rule set. 🚫 What This Script Is NOT • Not a prediction engine • Not financial advice • Not auto trading • Not guaranteed signals • Not a generic failed-break signal • Not a Swing Failure Pattern clone ⚠️ Limitations & Transparency The script is rule-based and depends on recent price, volatility, range, volume, and candle behavior. Different timeframes can change how failure and recovery appear. Volatility spikes can temporarily distort boundary behavior. Symbols with unreliable volume may produce weaker participation readings. Outputs should always be interpreted with broader market structure, liquidity, and risk context. 🧠 Market Context Notes Failed breakouts are most useful when the boundary is readable and the follow-up reaction is clear. A quick reclaim can show that the failed attempt is recovering. A weak retest, slow response, or deep move back into the range can show that the failed break is confirming instead. 🧾 Use Case Examples When price probes above a range, closes back inside, then quickly reclaims the upper boundary with supportive volume, the planner may classify the context as Recovery Active. When price probes above a range, closes back inside, retests the boundary from below, and rejects again, the planner may classify the context as Failure Confirmed. 🧱 System Philosophy AGPro planning tools are designed to help traders evaluate context before reacting. This script follows that philosophy by turning failed breakouts into a structured decision question: is the attempt recovering, aging, or confirming failure? 🔐 Non-Promise Statement No indicator can provide certainty. This tool provides structured visual context and rule-based attention markers. It does not guarantee continuation, reversal, recovery, or rejection. 📉 Risk Disclosure Trading involves risk. Market conditions can change quickly, and no script can remove uncertainty. Users are responsible for their own analysis, risk management, and decisions. This script is for educational and analytical use only and does not provide financial advice. 📚 Educational Note Use the planner to study how failed breakouts behave after the first rejection, how reclaim speed affects context, and how risk shelves help organize post-failure review.
Pine Script® indicator
by AGProLabs
Impulse Follow-Through Quality [AGPro Series]Impulse Follow-Through Quality 🧠 Core Idea Did the impulse receive enough follow-through to remain valid? 📌 Overview / What it does Impulse Follow-Through Quality is a chart-first momentum expansion planner built to evaluate what happens after a strong impulse candle appears. Instead of treating every strong candle as a standalone signal, the script starts a follow-through review window and measures whether price extends, pauses constructively, pulls back too deeply, reaches a target-room guide, or crosses a failure rail. These elements are converted into a 0-100 Impulse Quality score and a clear next-action state. The script produces an impulse highlight, follow-through box, failure rail, measured target guide, compact labels, alerts, and a clean AGPro planning panel. It does not predict continuation, automate trades, or guarantee that momentum will continue. 🎯 Purpose & Design Philosophy This script was built for traders who want to separate a meaningful impulse from a candle that only looks strong for one bar. Many momentum tools focus on the impulse itself. The practical question often comes after that candle: does the move attract follow-through, or does it begin to fail? This planner fills that gap by turning the post-impulse phase into a readable decision process. The design supports a patient review mindset: identify the impulse, watch the follow-through window, evaluate pullback depth, check target room, and review the failure rail before reacting. ⚡ Why This Script Is Different Most tools focus on strong candles, volume spikes, momentum bursts, or basic continuation labels. This script does NOT act as a Volume Climax Detector, does NOT rebuild an Institutional Candle Detector, and does NOT reduce the chart to a simple buy/sell momentum signal. Instead, it evaluates what happens after the impulse. The key output is not the candle itself. The key output is the follow-through quality state: IMPULSE, WAIT FT, FT WATCH, VALID FT, PULLBACK RISK, WEAK FT, FAILED, or TARGET REVIEW. ⚙️ Methodology 1. Context Detection The script detects qualified bullish or bearish impulse candles using ATR-normalized range, body efficiency, close location, trend context, and participation. 2. Reference Mapping Once an impulse qualifies, the script maps the impulse origin, follow-through box, failure rail, and target-room guide. 3. Reaction Evaluation The model evaluates follow-through progress, closes beyond the impulse close, retracement depth, participation support, target room, and whether price crosses the failure rail. 4. Visual Output The result is displayed through an impulse highlight, centered follow-through box label, failure rail, target guide, compact labels, deterministic alerts, and a premium AGPro panel. 🗺️ How to Read the Chart Impulse Highlight = the latest qualified impulse leg that starts the review window. Follow-Through Box = the active planning area between the impulse close and the measured target-room guide. Its label is centered inside the box. Failure Rail = the practical invalidation reference behind the impulse. It is an analytical line, not a stop order. Target Guide = a measured target-room reference based on the impulse range. Labels = compact state markers for impulse start, constructive follow-through, weak follow-through, pullback risk, failure rail review, and target review. Colors = teal supports constructive long-side follow-through, pink supports short-side or failure context, amber marks review risk, and indigo marks watch states. Panel = summarizes Impulse Quality, Follow-Through, Pullback Risk, Target Room, and Action. 🚦 Signals & States • IMPULSE → a qualified impulse candle has started a review window. • WAIT FT → the impulse exists, but follow-through is not confirmed yet. • FT WATCH → follow-through conditions are improving but not strong enough for the highest state. • VALID FT → follow-through quality is constructive according to the rule set. • PULLBACK RISK → retracement depth is elevated inside the impulse range. • WEAK FT → the follow-through window is aging without enough progress. • FAILED → price crossed the failure rail behind the impulse. • TARGET REVIEW → price reached the measured target-room guide and context should be reviewed. 🔔 Alerts Logic Alerts can trigger when a new impulse starts, follow-through becomes constructive, follow-through enters watch state, the move weakens, pullback risk rises, price crosses the failure rail, or price reaches the target-room guide. Each alert is an attention marker. Alerts are not trade instructions, entry commands, exit commands, or automated strategy rules. 🧩 Confluence Logic The strongest context appears when a clean impulse candle is followed by measurable progress, multiple closes beyond the impulse close, controlled retracement depth, supportive participation, and readable target room. When these components weaken, the planner can shift toward WAIT FT, FT WATCH, PULLBACK RISK, WEAK FT, or FAILED. 📊 When to Use • After strong momentum candles where continuation quality matters. • During trend continuation attempts that need follow-through review. • After breakout or expansion bars where a one-bar move may be misleading. • On liquid symbols where ATR, candle structure, and volume behavior are readable. • When you want a post-impulse planning map instead of another raw momentum signal. ⚠️ When NOT to Use • Very low-liquidity symbols with unstable candles or unreliable volume. • Extremely noisy micro-timeframes where impulse candles appear too frequently. • News-driven spikes where one-bar expansion can distort the model. • Markets with large gaps that make ATR and failure-rail references less useful. • Situations where the user expects guaranteed continuation or automated trade signals. 🎛️ Key Inputs • Follow-Through Side → controls Auto, Long Follow-Through, or Short Follow-Through mode. • Minimum Impulse ATR → changes how large a candle must be before review begins. • Minimum Body Efficiency → controls how clean the impulse body must be. • Minimum Edge Close → controls how near the candle must close to its directional edge. • Follow-Through Window → controls how many bars are used to judge early continuation. • Required Progress ATR → defines preferred movement after the impulse close. • Maximum Pullback Ratio → controls when retracement depth becomes elevated risk. • Failure Rail Buffer ATR → adjusts the analytical failure rail behind the impulse. • Visual settings → control the impulse highlight, follow-through box, failure rail, target guide, labels, panel visibility, panel location, theme, and font sizes. 🖥️ Interface & Visual Design The interface is designed to stay chart-first. The impulse highlight gives the origin. The follow-through box gives the active planning area. The failure rail and target guide define the practical review frame. The AGPro panel provides a compact decision summary with a merged blue title row, adjustable panel location, adjustable theme, and adjustable font size. 🧪 Practical Usage Workflow 1. Read the panel Impulse Quality score and Action. 2. Check the impulse highlight and the direction of the follow-through box. 3. Review whether price is extending beyond the impulse close. 4. Compare pullback depth with the failure rail. 5. Use the target guide as a context-review reference, not as a guarantee. 6. Treat alerts as attention markers inside broader analysis. 🔍 Interpretation Guidelines Think in terms of follow-through quality, not prediction. A higher score means the impulse has more constructive continuation characteristics according to the script's rule set. A weaker score means the move may be aging, retracing too deeply, lacking progress, or crossing its failure reference. VALID FT does not mean price must continue. FAILED does not mean the market cannot recover later. The states organize the review process. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not an auto-trading system. • Not a guaranteed signal tool. • Not a buy/sell signal service. • Not a Volume Climax Detector. • Not an Institutional Candle Detector. • Not a generic momentum oscillator. ⚠️ Limitations & Transparency The script is rule-based and depends on recent price action, ATR, candle structure, selected inputs, and volume behavior. Different timeframes can produce different impulse and follow-through readings. Volatility spikes can temporarily distort the score. Symbols with unreliable volume may produce weaker participation readings. Outputs should always be interpreted with broader market structure, liquidity, and trader-defined risk controls. 🧠 Market Context Notes Impulse candles are only useful when the market confirms or rejects them through follow-through. A clean impulse that receives controlled extension may deserve more attention than a larger candle that immediately retraces. A smaller impulse can also become meaningful when the follow-through window stays organized. 🧾 Use Case Examples When price prints a strong bullish impulse, closes near the high, then follows through with multiple closes above the impulse close while pullback depth remains controlled, the planner may classify the move as VALID FT. When an impulse appears but price fails to extend, retraces deeply, or crosses the failure rail, the planner may shift toward WEAK FT, PULLBACK RISK, or FAILED. 🧱 System Philosophy AGPro planning tools are designed to help traders evaluate context before reacting. This script follows that philosophy by turning impulse follow-through into a structured planning question: did the move receive enough confirmation, progress, and risk clarity to remain worth reviewing? 🔐 Non-Promise Statement No indicator can guarantee continuation, reversal, breakout success, or outcome. This tool provides structured visual context and rule-based attention markers. It does not provide certainty. 📉 Risk Disclosure Trading involves risk. Market conditions can change quickly, and no script can remove uncertainty. Users are responsible for their own analysis, risk management, position sizing, and trading decisions. This script is for educational and analytical use only and does not provide financial advice. 📚 Educational Note Use the planner to study how strong candles behave after they appear, how follow-through quality changes across timeframes, and how pullback depth affects the readability of momentum continuation.
Pine Script® indicator
by AGProLabs
Volume Delta POCENGLISH VERSION Title: 🔥 Volume Delta POC — Real Institutional Support & Resistance (Dynamic, Auto-Updating) Description: What is this indicator? Volume Delta POC is a next-generation dynamic support and resistance indicator that goes far beyond traditional price-based levels. Instead of marking zones where price has simply bounced before, it identifies the exact price levels where institutional participants — banks, hedge funds, and large market operators — have repeatedly concentrated extraordinary buying or selling pressure, measured through volume delta. Volume delta is the difference between aggressive buying volume and aggressive selling volume within each candle. It is the most direct and objective measure of institutional intent available on a chart. When multiple candles with extreme delta activity cluster around the same price level, that level is not random — it is a zone of genuine, repeated institutional interest. That is exactly what this indicator detects, calculates, and marks automatically. Why is it better than manually drawn support and resistance? Traditional support and resistance — whether drawn by hand or generated by standard pivot indicators — has three critical weaknesses that seriously limit its reliability in live trading: 🔴 Subjectivity: Every trader draws them differently. Two traders looking at the same chart will rarely agree on the exact levels. This makes them inconsistent and unreliable as a shared reference. 🔴 No volume context: A price level touched many times on low volume carries almost no institutional weight. Traditional S/R cannot distinguish a meaningful level from a random one. 🔴 Static and outdated: Once drawn, manual levels never update. As the market evolves, these lines remain on the chart even when they have completely lost their relevance. Volume Delta POC solves all three problems at once: ✅ Fully objective: The level is calculated mathematically. It does not depend on the trader's interpretation. Every user sees exactly the same level on the same chart. ✅ Volume delta backed: Only price zones where a minimum configurable number of extreme delta candles have converged are marked. This ensures every line represents genuine, measurable institutional activity — not random price memory. ✅ Completely dynamic and self-updating: The dominant zone is recalculated on every single bar. As new high-delta candles appear and old ones fall outside the lookback window, the line updates automatically to reflect the current state of institutional interest. When a new dominant zone emerges, the old line is erased and replaced. The chart always shows the single most relevant level — nothing more, nothing less. How it works — the components ① Volume Delta Calculation The indicator uses TradingView's native ta.requestVolumeDelta() function, which scans a lower timeframe (automatically selected or user-defined) to separate up-volume from down-volume for each bar. From this, it extracts two values per candle: the absolute delta range (deltaHigh − deltaLow), which measures the total magnitude of the buying/selling imbalance, and the delta close, which indicates whether buyers or sellers dominated. This makes the indicator sensitive not just to how much volume traded, but to the directional aggression behind it. ② High-Delta Candle Detection (HV Filter) A candle is classified as High-Delta (HV) when its absolute delta range exceeds the moving average of delta over the lookback period by a configurable multiplier (default: 2×). This isolates candles that represent genuine exceptional institutional participation — the moments when a large player stepped into the market with force and intent. HV candles are highlighted on the chart: teal background for bullish delta dominance (buyers more aggressive), red for bearish delta dominance (sellers more aggressive). ③ Confluence Zone Detection Once HV candles are identified, the indicator groups them by price proximity. It calculates the centroid — the average price — of all HV candles within the lookback window, then counts how many fall within a configurable tolerance band around that centroid (default: 0.3% of current price). A zone only qualifies if it accumulates at least the minimum required number of HV candles (default: 10, configurable up to 100). This threshold is the primary quality filter — it ensures the indicator only marks levels with substantial, repeated institutional activity. A single extreme candle, no matter how large, is never enough to draw a line. ④ The Dynamic POC Line When a qualifying zone is found, a single horizontal line is drawn at the average price of all contributing HV candles. This is the Point of Control — the price where accumulated institutional delta pressure is highest. There is always only one active line. Every bar the dominant zone is recalculated. If the zone composition changes, the line is deleted and redrawn at the updated level. This makes the POC a living reference that tracks institutional interest in real time. ⑤ Label — Confluence Strength and Net Delta Each line carries an optional label showing: the number of HV candles forming the zone (e.g. POC ×14), the exact price level, and the net accumulated delta of all contributing candles (e.g. Δ +24.5K or Δ −18K). The net delta tells you whether the level was built by aggressive buyers or aggressive sellers — information that is completely unavailable from any price-based support and resistance method. How to use it 📌 As dynamic support and resistance: When price approaches the POC from above, treat it as support — a zone where institutional buyers have shown up with force and may do so again. When price approaches from below, treat it as resistance — a zone where institutional sellers have dominated. The higher the POC ×N count, the stronger the expected reaction. 📌 Entry on retest: Wait for price to break through the POC zone and then pull back to retest it. On the retest, look for confirmation — a rejection candle, a delta shift, or absorption of opposing flow. Enter in the direction of the breakout with the POC level as your structural reference. 📌 Take profit and stop loss: Active POC lines make natural take profit targets. Place stop losses beyond the zone, not at it, to allow the trade room to work within the zone before a directional resolution. 📌 Trade filter: Avoid initiating positions in the middle of an active POC zone. Price tends to oscillate and probe the zone from both sides before resolving. Wait for a confirmed break or clean rejection. 📌 Combined with delta analysis: The POC provides the structural context — where to watch. Delta provides the trigger — when to act. When price tests the POC and real-time delta shows absorption at the level, the convergence of both signals is one of the highest-probability setups available. Input parameters Delta Multiplier: How many times above the delta MA a candle must be to qualify as HV. Default 2.0. Increase to be more selective. Delta MA Length: Period for the delta baseline average. Default 20. Lookback Bars: How far back the indicator searches for HV candles. Default 500. Zone Tolerance (%): Maximum price distance between candles to be grouped in the same zone. Default 0.3%. Minimum HV Candles: Minimum candles required to draw a level. Default 10, max 100. This is the most important quality filter. POC Line Extension: How many bars the line projects to the right. Default 50. Custom Timeframe: Override the automatic lower timeframe for delta calculation. Recommended settings Major Forex (EURUSD, GBPUSD): Tolerance 0.15–0.25%, Min HV 8–12 Indices (SPX, NAS, DAX): Tolerance 0.3–0.5%, Min HV 8–15 Gold (XAUUSD): Tolerance 0.3–0.5%, Min HV 8–12 Crypto (BTC, ETH): Tolerance 0.6–1.2%, Min HV 6–10 Stocks: Tolerance 0.4–0.8%, Min HV 5–10 Notes Requires volume data from your broker/data provider. Works best on Daily, 4H, and 1H timeframes. Always combine with a confirmation signal before entering. Past institutional activity at a level does not guarantee future reaction — apply proper risk management on every trade. VERSIÓN EN ESPAÑOL Título: 🔥 Volume Delta POC — Soporte y Resistencia Institucional Real (Dinámico, Auto-Actualizable) Descripción: ¿Qué es este indicador? Volume Delta POC es un indicador de soporte y resistencia dinámico de nueva generación que va mucho más allá de los niveles tradicionales basados en precio. En lugar de marcar zonas donde el precio simplemente ha rebotado antes, identifica los niveles de precio exactos donde los participantes institucionales — bancos, hedge funds y grandes operadores de mercado — han concentrado repetidamente una presión compradora o vendedora extraordinaria, medida a través del delta de volumen. El delta de volumen es la diferencia entre el volumen comprador agresivo y el volumen vendedor agresivo dentro de cada vela. Es la medida más directa y objetiva de la intención institucional disponible en un gráfico. Cuando múltiples velas con actividad de delta extrema se agrupan en el mismo nivel de precio, ese nivel no es aleatorio — es una zona de interés institucional genuino y repetido. Eso es exactamente lo que este indicador detecta, calcula y marca automáticamente. ¿Por qué es mejor que los soportes y resistencias dibujados manualmente? Los soportes y resistencias tradicionales — ya sean trazados a mano o generados por indicadores de pivotes estándar — tienen tres debilidades críticas que limitan seriamente su fiabilidad en el trading en vivo: 🔴 Subjetividad: Cada trader los dibuja de forma diferente. Dos traders mirando el mismo gráfico raramente coincidirán en los niveles exactos. Esto los hace inconsistentes e irrepetibles como referencia compartida. 🔴 Sin contexto de volumen: Un nivel de precio tocado muchas veces con volumen bajo no tiene casi ningún peso institucional. El S/R tradicional no puede distinguir un nivel significativo de uno aleatorio. 🔴 Estáticos y obsoletos: Una vez dibujados, los niveles manuales nunca se actualizan. A medida que el mercado evoluciona, estas líneas permanecen en el gráfico aunque hayan perdido toda su relevancia. Volume Delta POC resuelve los tres problemas a la vez: ✅ Completamente objetivo: El nivel se calcula matemáticamente. No depende de la interpretación del trader. Todos los usuarios ven exactamente el mismo nivel en el mismo gráfico. ✅ Respaldado por delta de volumen: Solo se marcan zonas donde ha convergido un número mínimo configurable de velas con delta extremo. Esto garantiza que cada línea mostrada representa actividad institucional genuina y medible — no memoria de precio aleatoria. ✅ Completamente dinámico y auto-actualizable: La zona dominante se recalcula en cada barra. A medida que aparecen nuevas velas de alto delta y las antiguas salen de la ventana de lookback, la línea se actualiza automáticamente. Cuando emerge una nueva zona dominante, la línea anterior se borra y se reemplaza. El gráfico siempre muestra el único nivel más relevante — nada más, nada menos. Cómo funciona — los componentes ① Cálculo del delta de volumen El indicador utiliza la función nativa de TradingView ta.requestVolumeDelta(), que escanea un timeframe inferior (seleccionado automáticamente o definido por el usuario) para separar el volumen alcista del bajista en cada barra. De esto extrae dos valores por vela: el rango absoluto de delta (deltaHigh − deltaLow), que mide la magnitud total del desequilibrio compra/venta, y el delta close, que indica si compradores o vendedores dominaron la vela. Esto hace al indicador sensible no solo a cuánto volumen se operó, sino a la agresividad direccional detrás de ese volumen. ② Detección de velas de alto delta (Filtro HV) Una vela se clasifica como Alto Delta (HV) cuando su rango absoluto de delta supera la media móvil del delta durante el período de lookback por un multiplicador configurable (por defecto: 2×). Esto aísla las velas que representan participación institucional excepcional genuina — los momentos en que un gran operador entró al mercado con fuerza e intención. Las velas HV se destacan en el gráfico: fondo verde azulado para dominancia delta alcista (compradores más agresivos), rojo para dominancia delta bajista (vendedores más agresivos). ③ Detección de zona de confluencia Una vez identificadas las velas HV, el indicador las agrupa por proximidad de precio. Calcula el centroide — el precio promedio — de todas las velas HV dentro de la ventana de lookback, luego cuenta cuántas caen dentro de una banda de tolerancia configurable alrededor de ese centroide (por defecto: 0,3% del precio actual). Una zona solo se activa si acumula al menos el número mínimo requerido de velas HV (por defecto: 10, configurable hasta 100). Este umbral es el filtro de calidad principal — garantiza que el indicador solo marque niveles con actividad institucional sustancial y repetida. Una sola vela extrema, por grande que sea, nunca es suficiente para dibujar una línea. ④ La línea POC dinámica Cuando se encuentra una zona válida, se dibuja una única línea horizontal en el precio promedio de todas las velas HV contribuyentes. Este es el Punto de Control — el precio donde la presión institucional acumulada de delta es más alta. Siempre existe una sola línea activa. En cada barra la zona dominante se recalcula. Si la composición de la zona cambia, la línea se borra y se redibuja en el nivel actualizado. Esto hace que el POC sea una referencia viva que rastrea el interés institucional en tiempo real. ⑤ Etiqueta — fuerza de confluencia y delta neto Cada línea lleva una etiqueta opcional que muestra: el número de velas HV que forman la zona (ej. POC ×14), el precio exacto del nivel, y el delta neto acumulado de todas las velas contribuyentes (ej. Δ +24,5K o Δ −18K). El delta neto indica si el nivel fue construido por compradores agresivos o vendedores agresivos — información completamente inaccesible desde cualquier método de soporte y resistencia basado en precio. Cómo usarlo 📌 Como soporte y resistencia dinámico: Cuando el precio se acerca al POC desde arriba, trátalo como soporte — una zona donde los compradores institucionales han aparecido con fuerza y pueden hacerlo de nuevo. Cuando se acerca desde abajo, trátalo como resistencia. Cuanto mayor sea el contador POC ×N, más fuerte será la reacción esperada. 📌 Entrada en retesteo: Espera a que el precio rompa la zona POC y luego vuelva a testearla. En el retesteo, busca confirmación — una vela de rechazo, un cambio de delta, o absorción del flujo contrario. Entra en la dirección de la rotura con el nivel POC como referencia estructural. 📌 Take profit y stop loss: Las líneas POC activas son objetivos naturales de take profit. Coloca los stop loss más allá de la zona, no en ella, para dar margen a la operación dentro de la zona antes de la resolución direccional. 📌 Filtro de operaciones: Evita iniciar posiciones en medio de una zona POC activa. El precio tiende a oscilar y sondear la zona desde ambos lados antes de resolver. Espera una rotura confirmada o un rechazo limpio. 📌 Combinado con análisis de delta: El POC proporciona el contexto estructural — dónde mirar. El delta proporciona el disparador — cuándo actuar. Cuando el precio testea el POC y el delta en tiempo real muestra absorción en el nivel, la convergencia de ambas señales es una de las configuraciones de mayor probabilidad disponibles. Parámetros de configuración Multiplicador delta: Cuántas veces por encima de la media de delta debe estar una vela para clasificarse como HV. Por defecto 2,0. Longitud media delta: Período para la media baseline del delta. Por defecto 20. Barras de lookback: Cuánto atrás busca el indicador velas HV. Por defecto 500. Tolerancia de zona (%): Distancia máxima de precio entre velas para agruparse en la misma zona. Por defecto 0,3%. Mínimo de velas HV: Mínimo de velas requerido para dibujar un nivel. Por defecto 10, máximo 100. Es el filtro de calidad más importante. Extensión línea POC: Cuántas barras proyecta la línea hacia la derecha. Por defecto 50. Timeframe personalizado: Sobreescribe el timeframe inferior automático para el cálculo del delta. Configuración recomendada Forex mayor (EURUSD, GBPUSD): Tolerancia 0,15–0,25%, Mín HV 8–12 Índices (SPX, NAS, DAX): Tolerancia 0,3–0,5%, Mín HV 8–15 Oro (XAUUSD): Tolerancia 0,3–0,5%, Mín HV 8–12 Cripto (BTC, ETH): Tolerancia 0,6–1,2%, Mín HV 6–10 Acciones: Tolerancia 0,4–0,8%, Mín HV 5–10 Notas importantes Requiere datos de volumen del broker/proveedor de datos. Funciona mejor en temporalidades Diaria, 4H y 1H. Combina siempre con una señal de confirmación antes de entrar. La actividad institucional pasada en un nivel no garantiza reacción futura — aplica siempre gestión de riesgo adecuada en cada operación.
Pine Script® indicator
by BullBearSR
Line Break Overlay📌 Introduction The Line Break Overlay indicator allows you to plot a traditional Line Break chart (such as the classic 3-Line Break) directly on top of your standard time-based charts (Candlesticks, Bars, etc.). By rendering Line Break boxes over standard charts, you can filter out market noise and identify clear, trend-following price action without losing the context of time or the details of standard candlestick patterns. ✨ Key Features True Overlay Design: Uses Pine Script's advanced box objects to draw Line Break blocks directly over your current chart. The boxes extend dynamically as new bars form until a new box is confirmed. Customizable Period: While the 3-Line Break is the standard, you can adjust the "Line Break Period" to any number (e.g., 2, 4, 5) to suit your trading style. Dynamic Reversal Level: Visually plots the exact price level required for the current trend to reverse. This acts as a great dynamic support/resistance or trailing stop level. Memory Management: Built-in array and object management limits the number of boxes drawn (default 200) to prevent performance issues and keep your chart running smoothly. ⚙️ Settings & Customization Line Break Period: Choose the number of previous lines/boxes the price must break to trigger a reversal. Source: Choose the price source. The default is hl2 (High+Low/2), but you can change it to close or others based on your preference. Max Box History: Set the maximum number of boxes to keep on the chart. Box Style: Fully customize the colors, transparency, and border width for both Uptrend and Downtrend boxes. Reversal Level: Toggle the visibility of the reversal line. Tip: To make the reversal line dashed, please go to the 'Style' tab in the indicator settings window and change the line style from 'Line' to 'Dashed'. 🔔 Alerts The script includes built-in alert conditions for trend reversals. You can easily set up notifications when the market shifts momentum: Trend Uptrend (Buy): Triggers when the price breaks the upper reversal level, confirming a new uptrend box. Trend Downtrend (Sell): Triggers when the price breaks the lower reversal level, confirming a new downtrend box. 💡 How to Use Use this indicator to identify major market trends and filter out minor retracements. If the boxes are green, the trend is up; if they are red, the trend is down. The reversal level clearly shows you where the trend will invalidate, making it highly useful for placing stop losses or breakout entries.
Pine Script® indicator
by SatohK
Bougie 9h Paris - High & Low du jour📊 Bougie 9h Paris - High & Low 🎯 Objectif Cet indicateur marque automatiquement le plus haut (High) et le plus bas (Low) de la bougie horaire de 9h00 (heure de Paris), un niveau clé largement utilisé par les traders sur les marchés européens (DAX, CAC40, indices européens, forex EUR…). La bougie de 9h correspond à l'ouverture des marchés européens et concentre souvent une forte volatilité. Ses extrêmes servent fréquemment de niveaux de référence pour la session : cassure haussière, cassure baissière, retour dans le range, etc. ⚙️ Fonctionnalités principales Détection automatique de la session Repère la plage horaire 9h00-10h00 en heure de Paris (Europe/Paris) Gère automatiquement les changements heure d'été / heure d'hiver Plage horaire entièrement personnalisable (pour adapter à l'ouverture US 15h30, par exemple) Affichage clair et épuré Trace une ligne verte horizontale sur le High de la bougie de 9h Trace une ligne rouge horizontale sur le Low de la bougie de 9h Affiche une zone colorée entre les deux niveaux (range de 9h) Étiquettes avec les valeurs exactes du High et du Low Lignes prolongées jusqu'à la fin de la journée pour visualiser les retests Nettoyage automatique Seuls les niveaux du jour en cours sont affichés Les niveaux des jours précédents disparaissent automatiquement à 9h le lendemain Graphique propre, sans accumulation de tracés historiques Alertes intégrées 🔔 Clôture de la bougie 9h : notification dès que les niveaux High/Low sont définitivement positionnés (à 10h) 🔔 Cassure du High : alerte lorsque le prix franchit le plus haut de 9h 🔔 Cassure du Low : alerte lorsque le prix franchit le plus bas de 9h 🛠️ Personnalisation Tous les éléments visuels sont configurables via le panneau de paramètres : Affichage des lignes, étiquettes et zone (activable/désactivable) Couleurs des lignes High, Low et de la zone Épaisseur des lignes Plage horaire de la bougie cible Prolongation des lignes jusqu'en fin de journée 📈 Comment l'utiliser Ajoutez l'indicateur à votre graphique (timeframe recommandé : M1, M5, M15 ou H1) À 10h00 heure de Paris, les niveaux High et Low s'affichent automatiquement Surveillez les cassures ou les rejets sur ces niveaux pour identifier vos opportunités Configurez les alertes pour ne rater aucun mouvement clé 💡 Stratégies compatibles Breakout : entrée à la cassure du High ou du Low de 9h Range trading : trading des rebonds entre les deux extrêmes Niveau de référence : confirmation directionnelle pour la séance Stop-loss / Take-profit : utilisation des niveaux comme zones techniques ⚠️ Recommandations Fonctionne au mieux sur les unités de temps inférieures ou égales à 1h Particulièrement efficace sur les indices européens, le forex et les futures actifs à l'ouverture européenne À combiner avec votre analyse globale (tendance, volume, contexte macro)
Pine Script® indicator
by JulianDaMoore
Reaction Follow-Through Planner [AGPro Series]Reaction Follow-Through Planner 🧠 Core Idea Did the first reaction actually create follow-through, or did price only bounce and fade? 📌 Overview / What it does Reaction Follow-Through Planner is a decision-oriented overlay that evaluates what happens after price produces an initial reaction around a confirmed swing reference. Instead of only marking the reaction itself, the script opens a structured follow-through window, measures progress, tracks defense of the reaction zone, defines invalidation, estimates target room, and converts the context into a 0-100 planner score. It produces reaction zones, follow-through tracks, continuation markers, failed-reaction labels, risk/target guide lines, and a compact AGPro panel. It does not predict future price, place trades, automate execution, or claim that any reaction must continue. 🎯 Purpose & Design Philosophy This script was built for traders who already understand that a reaction candle is not enough. Many charts show a wick, bounce, rejection, hold, or local response, but the real question comes after that first response: did the market follow through with clean progress, participation, and defended invalidation? The design philosophy is simple: treat reaction analysis as a planning workflow. The script helps organize the reaction into strength, follow-through, invalidation, room, and next action. ⚡ Why This Script Is Different Most reaction tools focus on finding the reaction candle, drawing the level, or scoring the first response. This script does NOT clone a rejection-block detector, a support/resistance reaction map, or a generic pivot reaction score. Instead, it starts after the first reaction appears. It tracks whether that reaction can defend its zone, produce directional progress, maintain follow-through, and offer enough room before the context becomes stale or failed. ⚙️ Methodology 1. Context Detection The engine tracks confirmed swing reaction references and waits for price to interact with them. 2. Reference Mapping When the first response is accepted, the script builds a reaction zone from the first response candle and defines an invalidation edge beyond the defended area. 3. Reaction Evaluation The script grades the initial reaction candle using close defense, wick defense, body participation, and direction agreement. 4. Follow-Through Tracking During the tracking window, the model measures best directional progress, next-bar response, volume support, adverse excursion, time decay, and whether the invalidation edge remains defended. 5. Visual Output The chart displays reaction zones, follow-through tracks, target room, invalidation guides, continuation markers, failed-reaction labels, and a clean AGPro planner panel. 🗺️ How to Read the Chart Zones = the defended first-reaction area that should remain intact for the follow-through case to stay valid. Follow-through track = the movement path from the reaction close toward the current follow-through position. Invalidation guide = the price edge where the reaction context is considered failed by the script logic. Target room guide = the nearby structure or ATR-based room estimate used to judge whether the reaction still has space. Labels = optional reaction start markers, follow-through continuation, or failed-reaction context. Start labels and failed-reaction X markers are disabled by default, while failed-reaction labels use a separate low cap for a cleaner publication view. Colors = teal for bullish reaction continuation, pink for bearish reaction continuation, gold for weak or stalled contexts, and indigo for higher-quality follow-through. Panel = the current reaction strength, follow-through state, invalidation level, room estimate, and next action. 🚦 Signals & States • Bull Reaction Watch → a bullish reaction window is active, but follow-through still needs progress. • Bear Reaction Watch → a bearish reaction window is active, but follow-through still needs progress. • Bull Follow-Through → bullish follow-through reached the planner threshold. • Bear Follow-Through → bearish follow-through reached the planner threshold. • No Follow-Through → the reaction stayed defended but did not generate enough progress inside the tracking window. • Failed Reaction → price closed beyond the reaction invalidation edge. 🔔 Alerts Logic Alerts are attention markers, not trade instructions. New Bull Reaction Window triggers when a bullish first-response window opens. New Bear Reaction Window triggers when a bearish first-response window opens. Bull Follow-Through Ready triggers when bullish follow-through reaches the score and progress thresholds. Bear Follow-Through Ready triggers when bearish follow-through reaches the score and progress thresholds. Reaction Failed triggers when price closes beyond the active invalidation edge. 🧩 Confluence Logic The strongest context appears when reaction strength, next-bar progress, volume response, wick defense, and room all align. When the reaction candle is strong but follow-through is weak, the panel will usually remain in watch or no-follow-through mode. When follow-through progresses but invalidation is too close or room is limited, interpretation should stay cautious. 📊 When to Use • After a visible reaction from a swing high or swing low reference. • During retest, hold, rejection, or continuation planning. • When you want to separate first-response reactions from reactions that actually continue. • On symbols and timeframes with enough liquidity for clean candle structure. ⚠️ When NOT to Use • Extremely low-liquidity markets where reaction candles are unreliable. • Very noisy micro timeframes with erratic wicks. • News-driven volatility where invalidation and room can shift quickly. • Situations where the user expects automatic entries or guaranteed outcomes. 🎛️ Key Inputs • Swing Reaction Lookback → controls how selective the reaction references are. • First Response Mode → controls how strict the first reaction filter is. • Follow-Through Track Bars → controls how long the script evaluates continuation after the reaction. • Minimum Planner Score → sets the threshold for continuation-ready context. • Invalidation Buffer → controls how far beyond the reaction zone the invalidation edge sits. • Fallback Target Room → estimates room when no clean opposite structure is nearby. • Visual settings → control zones, optional start labels, outcome labels, failed-reaction label cap, optional failed markers, guides, density, and panel layout. 🖥️ Interface & Visual Design The interface is built around a clean AGPro panel and chart-first visuals. The panel gives the decision summary. The chart shows the defended reaction zone, follow-through track, invalidation edge, target room, and state labels. The visual hierarchy is intentionally restrained: enough labels to make the chart alive, but not so many that the reaction workflow becomes noisy. 🧪 Practical Usage Workflow 1. Read the panel to see whether a reaction window is active. 2. Check the reaction zone and invalidation edge. 3. Watch whether the follow-through track expands away from the zone. 4. Compare the score with available target room. 5. Treat alerts as review prompts, not execution commands. 🔍 Interpretation Guidelines A strong reaction is not automatically a strong follow-through. A clean follow-through usually needs directional progress, defended invalidation, supportive participation, and enough remaining room. If the panel says No Follow-Through, the reaction may still be interesting visually, but the script did not detect enough post-reaction continuation quality. If the panel says Failed Reaction, the original reaction context is no longer valid according to the script rules. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not auto trading. • Not guaranteed signals. • Not a replacement for risk management. • Not a generic support/resistance map. • Not a rejection-block scanner. ⚠️ Limitations & Transparency The script is rule-based and depends on confirmed swing references, ATR normalization, volume baselines, and selected sensitivity settings. Different timeframes can produce different reaction windows. High volatility can expand invalidation distance and reduce room quality. Low-liquidity markets can create misleading wick behavior. 🧠 Market Context Notes Reaction follow-through is strongest when the first response is supported by participation and clean progress away from the defended zone. It is weaker when price reacts but stalls near the zone, repeatedly revisits invalidation, or lacks target room. The script is designed to help traders think in terms of reaction quality, not certainty. 🧾 Use Case Examples When price reacts from a swing low and the next bars defend the reaction zone with rising progress, the planner may shift from Bull Reaction Watch to Bull Follow-Through. When price rejects a swing high but immediately reclaims the invalidation edge, the planner may mark Failed Reaction. When price bounces but fails to expand before the tracking window expires, the panel may show No Follow-Through. 🧱 System Philosophy The AGPro approach favors decision engines over simple signal indicators. This script follows that philosophy by turning a reaction into a structured review process: strength, follow-through, invalidation, room, and action. 🔐 Non-Promise Statement No score guarantees continuation. No alert confirms a profitable outcome. No visual state should be treated as certainty. 📉 Risk Disclosure Trading involves risk. Users are responsible for their own decisions, risk management, position sizing, and market interpretation. This script is for educational and analytical purposes only and does not provide financial advice. 📚 Educational Note Use this script to study how reactions behave after the first response. The goal is to improve interpretation discipline, not to replace a complete trading plan.
Pine Script® indicator
by AGProLabs