Get started

Indicators and strategies

Adaptive Reclaim Engine (ARE) Adaptive Reclaim Engine (ARE) Inspired by and adapted from the Precision Sniper script by WillyAlgoTrader Full credit to WillyAlgoTrader for the original concept and foundation that inspired this adaptation. 📖 Overview The Adaptive Reclaim Engine (ARE) is a multi-factor signal indicator built for intraday traders who want confluence-based entries with built-in trade management visualization. It blends six independent signals into a single weighted score, then filters those signals through a market regime engine to suppress entries during chop. ✅ Optimized for 3–5 minute charts ✅ Works on any liquid asset — futures, equities, forex, crypto ⚡ What Makes This Different While inspired by Precision Sniper's confluence approach, ARE introduces several distinct mechanics: 🎚️ Adaptive Weighted Scoring Six factors — Trend, Momentum, VWAP, Volume, HTF Bias, Candle Quality — each contribute a user-configurable weight to a 0–100% score. You decide what matters most. 🌡️ Regime Classification Engine Every bar is classified as EXPANSION, COMPRESSION, TREND, or CHOP based on ATR ratio and ADX behavior. → Hard chop blocks signals → Compression is allowed for early reclaim setups 🎯 Dual Entry Modes Pullback Reclaim — waits for price to pull into EMA21/VWAP confluence and reclaim EMA Cross — takes the classic 9/21 cross Hybrid — accepts either trigger ⏱️ Multi-Timeframe ATR Risk Stop loss can pull from a different timeframe's ATR (e.g., 1-min ATR while trading a 5-min chart) for tighter, more responsive risk. 🎰 Adaptive Targets Choose R-Multiple or Recent Swing targets — TP2 and TP3 automatically scale from TP1's distance. 📊 Live Trade Panel Entry, SL, TP1/TP2/TP3 lines update in real time, with auto-move to breakeven after TP1 and visual "HIT" confirmation as targets fill. 🧠 Signal Logic A signal fires only when all five conditions align: ✔️ Selected entry mode triggers (pullback reclaim, EMA cross, or hybrid) ✔️ Weighted score meets your minimum threshold (default: 68%) ✔️ Regime is not CHOP and ADX clears the chop filter ✔️ Candle confirmation present (reclaim/rejection or strong close, optional) ✔️ No conflicting signal currently active (prevents whipsaw flips) ⚙️ Key Inputs 🛡️ Risk Management SL ATR Multiplier (default: 1.5) ATR Timeframe — multi-TF risk control Move SL to Breakeven — auto-trigger after TP1 Target Style — R-Multiple or Recent Swing 🔍 Signal Filters Entry Mode — Hybrid / Pullback Reclaim / EMA Cross Min Weighted Score % (default: 68) ADX Chop Filter (default: 18) Pullback Memory Bars Require Reclaim/Rejection Candle ⚖️ Adaptive Score Weights Tune each factor to match your style: Trend Momentum VWAP Volume HTF Bias Candle Quality 🎨 Visuals 🌈 EMA 9/21/55 ribbon with directional fill 📏 VWAP line — color-coded by price position 🎭 Regime background tint (gold = expansion, gray = compression) 🟢🔴 BUY/SELL labels at signal bars 📐 Live trade lines — Entry / SL / TP1 / TP2 / TP3 extending right 🏷️ Floating label panel showing regime + live score percentage 💎 TP labels turn turquoise and show "HIT" as targets fill 🥇 SL label turns gold when moved to breakeven 🔔 Alerts Two alert conditions are exposed for TradingView's Alerts dialog: 🟢 Adaptive Reclaim Engine BUY 🔴 Adaptive Reclaim Engine SELL A detailed alert() call also fires on each signal with full trade specs: Entry • SL • TP1 • TP2 • TP3 • Score • Regime 📌 Recommended Use SettingRecommendation⏰ Timeframe3-minute or 5-minute charts💹 MarketsIndex futures (NQ, ES, YM, RTY), large-cap equities, major FX pairs🕐 SessionsRegular trading hours when volume and ATR are normalized ⚠️ Important Notes This is an indicator, not a strategy — it does not place orders. Use the visual trade plan and alerts to inform discretionary or semi-automated execution. 📉 Past performance of any signal logic does not guarantee future results. 🧪 Always validate on your specific instrument and session before risking capital. 🙏 Credits Original concept inspired by: WillyAlgoTrader — Precision Sniper
Pine Script® indicator
by TradeManager_PRO
Synvoya Confluence (SMC)Synvoya Confluence (SMC) — The all-in-one Smart Money Concepts indicator for TradingView. One indicator. 13 modules. Everything toggleable. Instead of loading 8-10 separate indicators for structure, FVGs, sessions, CRT, key levels, SMT, ADR, and liquidity — Synvoya Confluence combines them all into a single, clean tool. Every module has a master toggle. Show only what you need. ━━━━━━━━━━━━━━━━━━━━━━ WHAT'S INCLUDED ━━━━━━━━━━━━━━━━━━━━━━ 📐 Market Structure Internal + Swing BOS/CHoCH detection Fractal-style swing markers with HH/HL/LH/LL labels Close-based or wick-based confirmation mode Connecting lines between consecutive swing highs/lows 📦 Order Blocks + Breaker Blocks Bullish & bearish OBs tied to confirmed structure breaks Automatic breaker block conversion when an OB is mitigated Mitigation tracking with visual state changes Configurable max OBs per side 📊 Fair Value Gaps (FVG) Full 4-phase lifecycle: Active → Partial → Mitigated → Inverted (iFVG) Consequent Encroachment (CE) midline at 50% Inverse FVG detection with color flip ATR-based size filter to remove noise 💧 Liquidity Equal Highs (EQH) and Equal Lows (EQL) detection Sweep labels when liquidity is taken Inducement (IDM) markers at minor swing points ATR-adaptive tolerance for cross-instrument accuracy ⚖️ Premium / Discount Equilibrium line at 50% of swing range Premium and discount zone shading Live percentage readout (e.g., "72.0% Prem") 🕐 Sessions & Killzones Asia, Pre-London, London, Pre-NY, NY Open, NY AM, NY Lunch, NY PM 3 Silver Bullet windows (London, NY AM, NY PM) 8 ICT macro time windows All times in EST (America/New_York) — auto-DST, works with any broker timezone Session boxes with customizable colors 📏 Key Levels Previous Day High/Low (PDH/PDL) Previous Week High/Low (PWH/PWL) Previous Month High/Low (PMH/PML) Monday High/Low NY Midnight Open All labeled and color-coded 🕯️ CRT (Candle Range Theory) Detects CRT candles (outside bars) on 15min+ timeframes Draws previous candle's H/L as reference levels Lines auto-freeze when price touches them Timeframe-tagged labels (e.g., "CRT H4") 📈 ADR (Average Daily Range) 14-day average daily range with live consumption percentage Judas swing levels at ±ADR/3 from NY midnight open Optional ADR projection lines Color-coded by exhaustion: green → yellow → red 🔀 SMT Divergence Auto-detects correlated pair: EU↔GU, XAU↔XAG, NAS↔SPX Labels divergence at swing points: "SMT ▲" or "SMT ▼" Manual pair override available 📋 Multi-TF Dashboard Clean table showing Weekly, Daily, 4H, 1H bias (▲/▼/—) Active session indicator Repositionable (any corner) 🎨 Candle Coloring Optional candle tinting by structure bias Direction mode and structure-bias mode Off by default — enable in settings 🔔 Smart Alerts Bullish/Bearish BOS Bullish/Bearish CHoCH FVG touched Liquidity sweep CRT detected SMT divergence 📖 Built-in Glossary 26-row legend table explaining every abbreviation (OB, BB, FVG, iFVG, CE, EQH, EQL, IDM, BOS, CHoCH, CRT, ADR, SMT, etc.) Toggleable — show/hide from settings ━━━━━━━━━━━━━━━━━━━━━━ WORKS ON EVERYTHING ━━━━━━━━━━━━━━━━━━━━━━ Optimized for Forex (EURUSD, GBPUSD), Gold (XAUUSD), and Indices (NAS100), but works on any instrument and any timeframe. Session markings auto-adjust for timezone and daylight saving — no configuration needed regardless of your location or broker. ━━━━━━━━━━━━━━━━━━━━━━ SETTINGS ━━━━━━━━━━━━━━━━━━━━━━ Every visual element has its own show/hide toggle. All colors are customizable. 12 organized settings groups with 100+ configurable inputs. Clean by default — turn on only what you use. ━━━━━━━━━━━━━━━━━━━━━━ OPEN SOURCE ━━━━━━━━━━━━━━━━━━━━━━ Full source code visible. No hidden logic, no repainting, no locked features. GitHub: github.com/Synvoya/confluence Website: confluence.synvoya.com ━━━━━━━━━━━━━━━━━━━━━━ Built by Synvoya — synvoya.com Documentation & feature details: confluence.synvoya.com If you find this useful, a boost helps others discover it. Feedback and suggestions welcome in the comments.
Pine Script® indicator
by Synvoya
TraxisLab - Liquidation HeatmapTraxisLab Liquidation Heatmap is a visual liquidity-mapping tool designed to estimate potential liquidation zones based on recent pivot highs/lows, leverage levels, volume, volatility, and clustered price areas. The script projects possible long and short liquidation levels on the chart and groups nearby zones into readable clusters. It is built to help traders identify where leveraged positions may be vulnerable and where price could be drawn toward liquidity. Core Concept The indicator estimates liquidation zones by using pivot-based entry assumptions and configurable leverage levels. When a pivot high or pivot low is detected, the script calculates potential liquidation prices for selected leverage tiers such as: 10x 25x 50x 100x These levels are then displayed as heatmap zones and grouped into clusters when several liquidation levels are close to each other. Anchor Symbol Support The script can use an external anchor symbol as its data source. For example, traders can display liquidation estimates on one chart while calculating zones from a selected futures symbol such as BTCUSDT perpetual contracts. The anchor timeframe can also be customized, or left empty to use the current chart timeframe. This is useful when you want liquidation zones to be based on a more liquid reference market. Liquidation Zone Logic The script estimates liquidation levels using: Recent pivot highs and lows Configurable leverage tiers ATR-based volatility buffer Maintenance margin assumptions Fee buffer Position-size approximation Volume-based notional estimate Long liquidation zones are projected below potential long entry areas. Short liquidation zones are projected above potential short entry areas. The result is a visual map of areas where leveraged positions may be forced out if price reaches those zones. Heatmap Visualization Liquidation zones are drawn as boxes on the chart. The visual intensity depends on leverage, age, and density. Older zones can fade over time, while higher-density zones receive stronger visual emphasis. The heatmap includes: Warm colors for long liquidation zones Cool colors for short liquidation zones Highlighting for high-density clusters Special emphasis for the nearest zone Optional cluster lines Optional age fading Visual prioritization to reduce noise Cluster Detection Nearby liquidation levels are automatically grouped into clusters using an ATR-based cluster radius. Each cluster shows: Number of zones in the cluster Long vs short zone composition Estimated notional volume Distance from current price Relevance score Source information when using an anchor symbol This helps traders focus on important liquidity areas instead of reading every individual liquidation box. Nearest Zone Marker The indicator can automatically highlight the closest liquidation cluster to the current price. This marker shows: Direction of the nearest zone Percentage distance from price Estimated volume in the cluster This provides a quick overview of the next potential liquidity magnet above or below the market. Liquidity Cockpit Table The built-in table summarizes the most relevant nearby liquidation areas. It displays: Nearest short liquidation cluster above price Nearest long liquidation cluster below price Distance to each zone Estimated volume Number of active zones Number of active clusters Total estimated liquidation volume Data source status This makes it easier to read the heatmap without overcrowding the chart. Alerts The script includes alert conditions for: Price near a long liquidation cluster Price near a short liquidation cluster Alerts trigger when price approaches a cluster with sufficient density within the defined ATR distance. How to Use Use this indicator as a liquidity and risk map, not as a direct entry signal. Typical use cases include: Identifying potential liquidity magnets Spotting areas where leveraged traders may be forced out Comparing nearby long and short liquidation pressure Finding high-density liquidity clusters Watching whether price is approaching the nearest liquidation zone Using liquidation zones together with market structure, VWAP, trend, or order-flow tools The strongest zones are usually those with multiple clustered levels, higher estimated volume, and proximity to current price. Notes This script does not access exchange liquidation books directly. It creates an estimated liquidation heatmap based on price structure, volume, leverage assumptions, volatility, and configurable margin logic. Values shown in millions are approximate and should be treated as visual context, not exact liquidation data. The quality of the output depends on the selected symbol, anchor symbol, timeframe, and market conditions. Disclaimer This indicator is for educational and analytical purposes only. It does not provide financial advice, trading recommendations, or guaranteed results. Always use proper risk management and perform your own analysis before making trading decisions.
Pine Script® indicator
by TraxisLab
Top Bottom Reversal Entries + Clean Timeframe TPTop Bottom Reversal Entries + Clean Timeframe TP is a reversal-focused overlay designed to identify potential market tops and bottoms using a multi-factor scoring engine. The script combines RSI behavior, wick rejection, swing liquidity sweeps, Bollinger Band extremes, candle structure, ATR-based range validation, optional volume filtering, and EMA context into one clean reversal framework. It is built for traders who want a visual entry map for possible reversal zones, including clean ATR-based take-profit and stop-loss levels that automatically adapt to the active chart timeframe. Key Features Top & Bottom Reversal Detection The indicator searches for possible reversal conditions after price reaches local extremes. It evaluates both long and short setups using a structured score system. Multi-Factor Score Engine Long and short signals are based on a combination of: RSI overbought / oversold behavior Wick rejection Swing high or swing low sweeps Bollinger Band extremes Engulfing candle structure Previous candle confirmation ATR-based candle range validation A signal is only triggered once the required score threshold is reached. Liquidity Sweep Logic The script detects when price takes out a previous swing high or swing low and then closes back inside the range, highlighting potential trap or reversal areas. Wick Rejection Filter Strong upper or lower wicks are used to identify rejection candles near potential tops or bottoms. Bollinger Band Context Optional Bollinger Bands help show when price is trading near statistical extremes. EMA 200 Context Filter The EMA can be displayed for trend context. It can also be used as a soft or hard filter depending on the settings. Optional Volume Filter A volume filter can be enabled to require above-average volume during reversal setups. Cooldown & Alternating Signals To reduce chart noise, the indicator includes cooldown logic and an optional long/short alternation mode. Clean TP / SL System The script includes a clean visual take-profit and stop-loss system based on ATR. When a long or short setup appears, the indicator can draw: Entry line TP1 TP2 TP3 Stop Loss The TP and SL distances can be calculated in two ways: Auto Timeframe Mode Automatically adjusts ATR multipliers depending on the active chart timeframe. Lower timeframes use tighter targets, while higher timeframes use wider targets. Manual Mode Allows full control over TP1, TP2, TP3, and SL ATR multipliers. Old TP/SL levels can be cleared automatically when a new entry appears or once TP3 / SL is reached. Signal Labels The chart displays simple and clean labels: L for possible bottom long setups S for possible top short setups Each label includes a tooltip with ticker, entry price, and setup score. Alerts The indicator includes alert conditions for: Possible Bottom Long Possible Top Short It also triggers built-in alert messages once a confirmed setup appears on bar close. How to Use This indicator is designed as a reversal entry assistant, not as a fully automated trading system. It can help traders identify areas where price may be forming a potential top or bottom, especially when multiple reversal factors align. Typical use cases include: Spotting possible bottom reversals after liquidity sweeps Identifying possible top reversals after overextended moves Mapping ATR-based profit targets and stop zones Combining reversal labels with higher-timeframe context Filtering trades using EMA 200, Bollinger Bands, or volume For best results, use this tool together with your own market structure, session timing, liquidity, and risk management rules. Notes Signals are generated only after bar confirmation. The TP/SL system is visual and based on ATR from the signal candle. The indicator does not execute trades and does not guarantee that any target or stop will be reached. The reversal score is designed to highlight confluence, not certainty. Disclaimer This indicator is for educational and analytical purposes only. It does not provide financial advice, trading recommendations, or guaranteed results. Always manage risk carefully and perform your own analysis before entering any trade.
Pine Script® indicator
by TraxisLab
Volatility Stop SelectorThe Volatility Stop Selector is a comprehensive trend-following tool designed to automatically identify the optimal volatility stop strategy. It features adjustable parameters and an integrated backtester that delivers institutional-grade insights into the recommended strategy. The model continuously adapts to new data in real time by evaluating multiple volatility length and factor combinations, determining the best-performing configuration, and presenting the backtest results in a clear, color-coded table that benchmarks performance against the buy-and-hold strategy. At its core, the model systematically backtests a wide range of volatility stop combinations to identify the configuration that maximizes the selected optimization metric. Users can choose to optimize for absolute returns or risk-adjusted returns using metrics such as the Sharpe, Sortino, Martin, or Calmar ratios. The Martin ratio is particularly well suited for volatility-based risk management strategies, as it evaluates returns relative to the Ulcer Index, capturing both the depth and duration of drawdowns and therefore favoring smoother equity curves. Alternatively, users can enable manual optimization to test custom volatility length and factor settings and view the corresponding backtest results. The label displays the Compounded Annual Growth Rate (CAGR) of the strategy, with the buy-and-hold CAGR in parentheses for comparison. The table presents the backtest results based on the volatility length and factor displayed at the top: Sharpe = CAGR per unit of standard deviation. Sortino = CAGR per unit of downside deviation. Calmar = CAGR relative to maximum drawdown. Max DD = Largest peak-to-trough decline in value. Beta (β) = Return sensitivity relative to buy-and-hold. Alpha (α) = Excess annualized risk-adjusted returns. Win Rate = Ratio of profitable trades to total trades. Profit Factor = Total gross profit per unit of losses. Expectancy = Average expected return per trade. Trades/Year = Average number of trades per year. This indicator is designed with flexibility in mind, enabling users to specify the start date of the backtesting period, the preferred volatility type, and the price source. Supported volatility types include the Average True Range (ATR), Standard Deviation (SD), and Mean Absolute Deviation (MAD). Supported price sources include Close, Heikin Ashi, HL2, HLC3, and OHLC4. To minimize overfitting, users can define constraints such as a minimum and maximum number of trades per year, as well as an optional optimization margin that prioritizes more robust combinations by requiring more reactive combinations to exceed this threshold. The table follows an intuitive color-coded logic that enables quick performance comparison against buy-and-hold (B&H): Sharpe = Green indicates better than B&H, while red indicates worse. Sortino = Green indicates better than B&H, while red indicates worse. Calmar = Green indicates better than B&H, while red indicates worse. Max DD = Green indicates better than B&H, while red indicates worse. Beta (β) = Green indicates better than B&H, while red indicates worse. Alpha (α) = Green indicates above 0%, while red indicates below 0%. Win Rate = Green indicates above 50%, while red indicates below 50%. Profit Factor = Green indicates above 2, while red indicates below 1. Expectancy = Green indicates above 0%, while red indicates below 0%. In summary, the Volatility Stop Selector is a powerful tool designed to help investors make data-driven decisions when selecting volatility-based trend-following strategies. By optimizing for risk-adjusted returns, investors can identify the best configurations using institutional-grade metrics. While results are based on the selected historical period, users should be mindful of overfitting, as past results may not persist under future market conditions. Since the model continuously recalibrates to incorporate new data, the recommended length and factor may evolve over time.
Pine Script® indicator
by QuantitativeAlpha
Volatility Compression Oscillator [JOAT]Volatility Compression Oscillator Introduction Volatility Compression Oscillator is a two-line momentum oscillator that measures where price is trading inside a dynamic volatility envelope, then tracks the compression and release of that positioning through line crosses, histogram rotation, and divergence. It is designed to show when price is quietly loading pressure, when that pressure starts to expand, and when expansion may be exhausting. This script is useful for traders who want more than a standard bounded oscillator. It combines normalized price location, dual smoothing, histogram analysis, and divergence into one compact pane. Why This Indicator Exists Adaptive Normalization: Measures price against a volatility-sensitive envelope instead of a fixed formula Two-Speed Momentum Read: Uses fast and slow lines to reveal early shifts in pressure Compression / Release Logic: The histogram shows whether momentum is accelerating or fading Exhaustion Markers: Histogram peaks and troughs help spot unstable extensions Divergence Layer: Tracks when price makes a new swing but oscillator pressure does not confirm Core Components Explained 1. Dynamic Volatility Envelope offset = avgRange * scale * (1 + avgBody / avgRange) The script centers the envelope around the candle midpoint average, then expands it with both average range and average body contribution. This makes the oscillator adaptive to both volatility and candle conviction. 2. Normalized Oscillator Calculation rawOsc = 100 * (close - lowerBand) / bandWidth - 50 Price is transformed into a centered oscillator that measures whether price is trading in the upper or lower half of the active volatility envelope. 3. Dual-Smoothing Engine The raw oscillator is processed through fast and slow smoothing chains. Their relationship drives the main trend reading: Fast above slow = bullish pressure Fast below slow = bearish pressure Histogram expanding = pressure increasing Histogram fading = pressure weakening 4. Signal Layers The indicator produces several distinct signal families: MA Cross Signals: Momentum handoff between fast and slow lines OB/OS Crosses: Stretch events when Line 1 crosses the thresholds Histogram Peaks / Troughs: Local exhaustion cues Divergences: Price making a stronger swing while oscillator pressure weakens 5. Chart Cleanliness Controls Divergence lines are retained with an internal cap so the script does not keep drawing indefinitely. This keeps the pane readable and reduces object-limit risk on long-running charts. Visual Elements Histogram Columns: Momentum spread between fast and slow lines Fast Line: Main directional pressure line Slow Line: Reference trend line Zero Fill: Directional fill from Line 1 to the centerline OB/OS Background: Soft shading in stretch conditions Signal Markers: Circles, triangles, diamonds, and squares for different event types Dashboard: Trend, line values, histogram value, regime, and divergence state Input Parameters Volatility Window: Lookback for midpoint, body, and range normalization Band Scale %: Width multiplier for the adaptive envelope OB / OS Levels: Stretch boundaries for Line 1 Line 1 / Line 2 Smoothing: Controls responsiveness of the dual-line engine Pivot Length: Sensitivity for divergence and histogram turning points Histogram Peak Levels: Defines stronger exhaustion zones How to Use This Indicator Step 1: Determine whether fast is above or below slow. Step 2: Watch the histogram for acceleration or decay. Step 3: Use MA crosses for timing only when they occur in sensible zones. Step 4: Treat OB/OS signals as context for stretch, not automatic reversal commands. Step 5: Respect divergences most when they align with histogram exhaustion. Best Practices Use higher pivot lengths when markets are noisy Treat histogram turns near extremes as better-quality warnings Use line crosses in the direction of the higher-timeframe trend Avoid overreacting to every divergence in strong trends Keep marker display on only if you actively trade the signal layer Indicator Limitations Oscillators can stay overbought or oversold in strong trends Divergences are warning signs, not standalone trade systems Short smoothing lengths will create more noise Compression readings can fail to expand immediately Signal quality depends heavily on market structure and instrument behavior Technical Implementation Built in Pine Script v6 using: Adaptive volatility-band normalization Dual-smoothed oscillator lines Histogram spread calculation Pivot-based divergence detection Object-retention caps for divergence lines Confirmed-bar signal logic Originality Statement This indicator is original in how it frames volatility compression and release through normalized envelope location, dual-line momentum, histogram exhaustion, and divergence management in one pane. Its value comes from synthesis and signal layering rather than from any single oscillator component alone. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Oscillator signals can fail, especially in volatile or trendless conditions. Always use proper risk management and independent judgment. -Made with passion by officialjackofalltrades
Pine Script® indicator
by officialjackofalltrades
Swing Delta Pressure | julzALGO📊 Swing Delta Pressure | julzALGO 🔷 1. Overview Swing Delta Pressure is a swing-anchored directional pressure framework that combines market structure, estimated buy/sell participation, delta imbalance, and a pressure-weighted trend path into one integrated overlay. The script is designed to help traders evaluate not only where price is moving, but whether buyer or seller participation is supporting that movement. By combining swing detection with candle anatomy and directional participation modeling, Swing Delta Pressure can be used for: • Initial swing flip detection • Pullback observation • Retest continuation planning • Directional pressure confirmation • Risk-to-reward execution planning 🔷 2. Core Concept Traditional indicators often focus mainly on price movement, standard volume, or static smoothing. Swing Delta Pressure expands this by integrating: • Swing high / swing low structure • Estimated buy volume • Estimated sell volume • Delta volume • Pressure acceleration • Participation weighting • Swing-anchored pressure path • Dynamic RR zones The core idea is simple: Each new swing establishes a structural anchor point. From that anchor: • Buyer and seller participation are estimated • Delta pressure is accumulated • Price is weighted by participation strength • The active pressure path updates until the next structural swing flip Where volume calculation starts: Buy Volume (B), Sell Volume (S), Delta (Δ), and Imbalance (%) begin calculating from the swing anchor pivot marker and continue accumulating through each new bar until the next confirmed swing flip occurs. Simple rule: Swing Anchor Pivot → Present Active Bar Bullish swing: When a bullish swing is confirmed, volume tracking starts from the swing low anchor. Bearish swing: When a bearish swing is confirmed, volume tracking starts from the swing high anchor. Reset rule: When a new opposite swing flip occurs: • Previous swing totals stop • Previous path becomes historical • New swing totals reset • New cumulative tracking begins Important: B / S / Δ / % values are not single-candle values. They represent cumulative estimated directional participation from the swing origin to the current active bar. This helps traders evaluate whether the full active swing remains buyer- or seller-dominant, even during pullbacks or retests. 🔷 3. How It Works The Swing Engine continuously tracks rolling swing highs and lows using the selected swing detection length. This identifies: • Bullish swing flips • Bearish swing flips • Structural pivots • Active anchor zones The Delta Pressure Engine estimates buyer and seller participation using: • Candle body size • Upper wick behavior • Lower wick behavior • Close position within candle range • Relative volume intensity • Delta acceleration Instead of treating every candle equally, the pressure path weights price using directional participation. High-participation candles influence the path more strongly than weak candles. This creates a more adaptive flow path compared with standard smoothing. The RR system can project: • Entry • Stop Loss • Take Profit This allows traders to combine structure, participation, and visual risk planning in one workflow. Visual interpretation: • Blue path = Bullish directional pressure • Purple path = Bearish directional pressure • Blue anchor marker = Bull swing anchor where volume tracking starts • Purple anchor marker = Bear swing anchor where volume tracking starts • B = Estimated buyer participation from anchor to present bar • S = Estimated seller participation from anchor to present bar • Δ = Delta pressure from anchor to present bar • % = Active swing imbalance strength 🔷 4. Settings Swing Detection Length Controls the sensitivity of structural swing flips. Suggested reference: • 20–30 = Faster / scalping • 40–60 = Balanced / intraday • 80+ = Higher timeframe / smoother Weight Mode Participation: Balanced swing participation and stable path behavior. Delta Absolute: More reactive directional shifts. Smart Pressure: Higher sensitivity to stronger impulse moves. Volume Mean / StdDev Length Controls participation normalization. Suggested reference: • 100 = More reactive • 200 = Balanced • 300+ = Smoother Stop Loss Type ATR: Adaptive volatility-based stop. Pivot: Structure-based stop. ATR Multiplier Suggested reference: • 1.5 = Tight • 2.0 = Balanced • 2.5+ = Wider Risk:Reward Suggested reference: • 1.5 = Conservative • 2.0 = Balanced • 3.0 = Extended trend target General preset: • Swing Length: 50 • Weight Mode: Participation • Stop Loss Type: Pivot or ATR depending on strategy • ATR Multiplier: 2.0–3.0 • Risk:Reward: 2.0 🔷 IMPORTANT NOTES • This indicator does not guarantee profits and should not be used in isolation • Market conditions can vary; always apply proper risk management • Past performance does not indicate future results 🔷 DISCLAIMER This script is for educational and informational purposes only. It does not constitute financial advice. Always do your own analysis before making trading decisions.
Pine Script® indicator
by julzALGO
Untested Highs & Lows (Auto Remove When Tested)📌 Indicator Name: Untested Liquidity Highs & Lows 🧠 Description This indicator plots untested swing highs and swing lows on the chart as horizontal liquidity levels. These levels represent areas where price previously reversed (pivot points) but has not yet returned to “mitigate” or “take” the liquidity resting at those prices. 🔴 Red lines = Untested liquidity levels When price revisits and “sweeps” a level, it is automatically removed from the chart. The goal of this tool is not to predict direction, but to visualize where liquidity is resting in the market and how price interacts with those areas over time. 📊 How to Use It 1. Identify Liquidity Zones Red lines mark swing highs and swing lows that have not yet been revisited These are areas where stop orders and pending liquidity are likely resting 2. Understand Market Behavior Price often moves toward liquidity before reversing or continuing trend direction. These levels help you see where price may be drawn next. 3. Watch for Sweeps When price moves through a level and does not respect it: The line disappears automatically This represents liquidity being taken (swept) Sweeps are often followed by: reversals expansions continuation moves after mitigation 🎯 Trading Application Traders commonly use this tool to: Identify potential target zones (liquidity pools) Wait for liquidity sweeps before entries Confirm market intent (accumulation vs distribution) Avoid entering before liquidity is taken ⚠️ Important Note This indicator does not predict direction. It simply maps where liquidity exists and when it is removed, which is a core concept in modern price action and ICT-style trading models.
Pine Script® indicator
by ericadanea
Lumina Trend Channels & Bands [Pineify]Pineify - Lumina Trend Channels & Bands Lumina Trend Channels & Bands is an overlay indicator that builds a volatility-adjusted trend channel around a Volume-Weighted Moving Average (VWMA). VWMA forms the baseline, while ATR bands define how far price must move before trend state changes. Key Features VWMA midpoint weighted toward higher-volume closes. ATR-based upper and lower bands that adapt to current range. Persistent trend state while price remains inside the channel. Triangle markers on the first cross above the upper band or below the lower band. How It Works The script calculates a VWMA of close, then adds and subtracts ATR multiplied by the Band Multiplier. A close above the upper band sets bullish state; a close below the lower band sets bearish state. Between the bands, the prior state is preserved. Compute the VWMA baseline. Measure ATR and scale it by the Band Multiplier. Plot upper and lower channel bands around the VWMA, then mark the first crossover or crossunder. How the Components Work Together VWMA supplies the directional anchor, while ATR decides how much evidence price needs before a breakout is treated as meaningful. In high volatility the bands widen and demand a stronger close; in quiet conditions the channel tightens and reacts sooner. The cloud fill emphasizes the active side of the trend. Trading Ideas and Insights A bullish triangle may indicate continuation after price clears the upper boundary. A bearish triangle may flag downside momentum when price loses the lower band. Inside-channel movement is a drift zone. Wait for bar close on live bars; fast reversals can lag, and ranges can whipsaw. Unique Aspects Trend state is retained inside the ATR channel, reducing flip-flopping around the VWMA. The asymmetric cloud emphasizes the active trend side while keeping the opposite band visible. How to Use Add the indicator to a clean price chart. Use the midline and channel to judge bullish, bearish, or undecided territory. Treat triangles as potential breakout starts, then look for confirmation. No built-in alert conditions are included in this version. Customization Trend Baseline Length (default: 50) - VWMA lookback. Higher values smooth the channel but add lag. Volatility (ATR) Length (default: 14) - ATR lookback for band width. Band Multiplier (default: 2.0) - Channel distance. Higher values reduce breakouts; lower values are more sensitive. Bullish/Bearish Trend Colors - Adjust line, cloud, and marker colors. Conclusion Lumina Trend Channels & Bands is for traders who want a clean VWMA trend channel with volatility-aware breakout markers. Use it as context alongside structure, volume, and risk management rather than as a standalone system.
Pine Script® indicator
by Pineify
Ralis Bull/Bear OscillatorRalis Bull/Bear Oscillator measures buying and selling pressure using True Range decomposition. Unlike single-bar OHLC analysis, True Range captures gap pressure from the prior close, giving a more complete picture of who controlled the bar. Buying pressure is the distance from the close to the true low (how far buyers pushed up), selling pressure is the distance from the true high to the close (how far sellers pushed down). Both are normalized by the true range to produce values on a 0–100 scale, then SMA-smoothed into two continuous lines: the green bull line and the red bear line. The pressure engine offers three calculation modes. Intrabar mode normalizes each bar independently — pure micro reads of who won that specific bar. Structural mode sums buying pressure, selling pressure, and true range over a lookback window before normalizing — this reveals the cumulative balance of power over the period. Average mode blends both, giving you micro responsiveness anchored by macro context. The default Period of 10 and Smoothing Length of 10 work well across most assets and timeframes. The 4-SMMA ribbon regime (8/16/24/32 on HL2) runs in the background, classifying the macro trend as Bullish, Bearish, or Neutral. Two independent tests must pass for a confirmed regime. Tangle detection checks that the inner ribbon lines (16/24) agree with the outer line relationship — if any inner line disagrees, the ribbon is tangled and the regime is Neutral. The neutral zone filter requires the percentage gradient between the fast outer (8) and slow outer (32) to exceed ±0.34% before confirming a trend. If the spread is too narrow, the regime stays Neutral regardless of alignment. The regime is displayed in the info table and can optionally tint the pressure lines. The SMMA calculations use inline var-state seeding for consistent cross-asset behavior. Pressure divergence detects exhaustion by comparing pivots on the pressure ratio (bull / (bull + bear) as a percentage) against price. Bearish divergence fires when price makes a higher high but the pressure ratio makes a lower high — buying pressure is fading despite higher prices. Bullish divergence fires when price makes a lower low but the pressure ratio makes a higher low — selling pressure is weakening despite lower prices. Pivots use 5 bars left and 3 bars right by default, with a maximum 24-bar lookback between two pivots to qualify. Divergence markers are orange triangles (bearish, top of pane) and cyan triangles (bullish, bottom of pane), plotted at the pivot bar where the divergence was confirmed. The spread histogram plots the difference between the bull and bear lines as columns behind the pressure lines. Green columns above zero indicate bull dominance, red columns below zero indicate bear dominance. Acceleration dimming modulates brightness based on whether the spread is growing or shrinking in magnitude. Bright bars mean the dominant side is gaining steam — the absolute spread is larger than the prior bar. Dim bars mean the dominant side is fading — the spread is contracting even though it may still be positive or negative. This gives an instant visual read on momentum acceleration without adding another indicator. Regime-tinted lines optionally fade the pressure line that is fighting the current ribbon regime. In a bullish regime, the bear line dims to 60% transparency while the bull line stays full brightness. In a bearish regime, the bull line dims. In a neutral regime, both lines fade to 40% transparency. This helps the eye focus on the pressure line that matters given the macro context. Percentile extreme bands draw the 90th and 10th percentile of both the bull and bear lines over a configurable lookback (default 200 bars). When either pressure line exceeds its 90th percentile, a subtle background highlight appears behind the oscillator pane — green for extreme buying pressure, red for extreme selling pressure. These zones flag historically unusual pressure readings that often precede reversals or signal trend acceleration. The info table displays Pressure (BULLS or BEARS with color-coded background), the current bull and bear line values, the spread between them, the pressure ratio as a percentage (green above 55%, red below 45%, white in between), and the ribbon regime (BULLISH in gold, BEARISH in blue, NEUTRAL in gray). The table supports 9-position placement. Four alert conditions are available. Bull Cross fires when buying pressure crosses above selling pressure. Bear Cross fires when selling pressure crosses above. Bull Divergence fires on bullish pressure divergence (price lower low, ratio higher low). Bear Divergence fires on bearish pressure divergence (price higher high, ratio lower high). All alerts include ticker and timeframe context. Settings are organized into five groups. Pressure Engine controls the calculation period, mode (Average/Intrabar/Structural), and smoothing length. Ribbon Regime controls the 4-SMMA source, lengths, and neutral zone percentage. Divergence controls visibility, pivot left/right bars, and maximum lookback between pivots. Visual controls line colors, spread histogram toggle, regime-tinted lines toggle, and percentile extreme bands with their lookback length. Table controls visibility and 9-position placement.
Pine Script® indicator
by ralis24
Fair Value GapsFair Value Gaps (FVG) auto-detects bullish (+FVG) and bearish (-FVG) three-candle imbalances on any chart, any timeframe. Tracks each gap's state through its lifecycle and shows a real-time dashboard with active gap counts, nearest gap distance, and exact zone prices. WHAT IS A FAIR VALUE GAP An FVG is a three-candle pattern where the middle candle moves so aggressively that it leaves a gap between the wick of the prior candle and the wick of the following candle. Price often returns to fill these gaps before continuing — making them useful as targets, entry zones, or invalidation levels. A bullish (+FVG) forms when the low of the current candle is above the high of two candles ago, with a bullish middle candle. A bearish (-FVG) is the inverse. FEATURES Auto-detects pip size for JPY pairs, other forex, metals, indices, and crypto — no manual configuration needed Tracks up to 10 active FVGs per side with configurable minimum size filter to ignore noise Auto-removes filled FVGs OR keeps them on chart greyed out (your choice) Optional midline marker (50% mitigation level) Configurable label limit so only your most recent active gaps are annotated — prevents chart clutter Dashboard shows active count, distance to nearest gap, and exact zone prices Cells highlight amber when price is currently inside a gap (mid-mitigation) Movable dashboard position (six options) so it coexists with other indicators Built-in alerts for new bullish and bearish FVG formations HOW TO USE Use FVGs as targets when price has left an unfilled gap behind — markets often return to fill them. Use them as entry zones when price retraces into a gap in the direction of the higher-timeframe trend. Use them as invalidation when price closes through a gap that should have held as support or resistance. Particularly useful for SMC and ICT traders watching for liquidity sweeps followed by displacement into a fair value gap, then a retracement entry. Pairs cleanly with the Key Swing Levels (KSL) indicator from the same author — KSL's dashboard defaults to top-right, FVG's to bottom-left, no overlap. Open-source. Feedback and forks welcome.
Pine Script® indicator
by ajaypercy
Price Regime Oscillator📊 Price Regime Oscillator (PRC) 🧠 Overview Price Regime Oscillator (PRC) is a custom-built market regime indicator designed to detect trend direction and momentum shifts using a normalized price-change approach. Unlike traditional oscillators, PRC focuses on relative price movement over a defined lookback period, then smooths it to produce a cleaner signal. The result is a dynamic regime filter that can be used for both trend identification and entry confirmation. This indicator is built on the previous PRC Market Regime Indicator, now directly integrated onto the chart. The PRC logic drives the visual representation through the EMA line and candle coloring, providing a clearer and more practical real-time application. This version integrates PRC directly into the chart by driving: EMA color (trend filter) Candle coloring (market bias) ⚙️ How It Works The core logic is based on: Price change over a selected period (PRC Length) Smoothing via EMA (PRC Smoothing) Signal line using EMA of PRC (EMA Length) 🔑 Signals: Bullish Regime PRC crosses ABOVE its EMA EMA turns green Candles turn green Bearish Regime PRC crosses BELOW its EMA EMA turns red Candles turn red Neutral No active crossover No coloring applied 📈 How To Use ✅ Trend Filter Use EMA color as a simple trend filter: Green → look for BUY setups Red → look for SELL setups ✅ Entry Confirmation Combine with your strategy: Enter after PRC crossover confirmation Or wait for pullback while trend color remains active ✅ Best Use Case Works best in: Trending markets Breakout environments ⚠️ Like all indicators, performance may degrade in sideways (range-bound) conditions. ⚙️ Inputs PRC Length → Lookback period for price change PRC Smoothing → Noise reduction on PRC EMA Length → Signal sensitivity 🎯 Key Features Clean trend visualization directly on chart PRC-based momentum logic (not standard EMA crossover) Non-repainting (based on confirmed bar close) Lightweight and fast ⚠️ Disclaimer This indicator is provided for educational and analytical purposes only. It does not constitute financial advice. Always use proper risk management and test any strategy before applying it in live trading.
Pine Script® indicator
by Aleksin_Aleksandar
LuxQuant - QQE TerminalThe LuxQuant - QQE Terminal is a high-performance momentum engine designed for traders who prioritize trade management over simple entry signals. While most indicators focus on "where to buy," the QQE Terminal focuses on how to stay in winners longer and cut losers quickly. Built on the foundation of the Qualitative Quantitative Estimation (QQE) algorithm, this version introduces a terminal interface and four specialized "Operator Modes" that adapt to your specific trading style. Trading Styles: Swing Trader (The Balanced Standard): Uses an RSI-14 base with dual-factor trailing stops. It is the only mode that displays "Slow Trend" dots for structural confirmation. Trend Trader (The Runner): Slower, smoother, and designed for maximum stability. This mode filters out market noise to keep you in major macro trends. Intraday Trader (The Scalper): A highly reactive, tight-factor setting (RSI-7) designed for fast-paced scalping and short-term momentum bursts. Reversal Trader (The Mean Reversion): Tuned specifically to identify overextended conditions (Overbought/Oversold) where a snap-back to the mean is likely. Additions: Dynamic Heatmap RSI: The momentum line changes color dynamically from "Bearish Pink" to "Cyberpunk Mint" based on the momentum pulse. Momentum Glow: An enhanced visual glow effect that increases in intensity as momentum accelerates. Cushion Fills: Subtle background fills between the RSI and the Fast QQE line help you visualize the "cushion" of your trade. Fully Customizable: All colors for the indicator pane (RSI, QQE lines, Zones, and Fills) are fully adjustable to match your chart theme. This script was made with LuxAlgo's QuantAI! Please let me know what you think!
Pine Script® indicator
by The_Estonian_
Harmonic Auto-Validator [GBB]Harmonic Auto-Validator I built this because every harmonic indicator I tried on TradingView was doing something weird with the math. Some draw "Gartleys" where B sits at 0.5 of XA instead of 0.618. Some skip the AB=CD validation entirely. Some draw a single line for D instead of the actual PRZ zone Carney describes in his books. After spending too many evenings trying to reverse-engineer what a few popular ones were actually checking, I decided to write my own from scratch and stick to the methodology Scott Carney lays out in "Harmonic Trading Volume One" (2004) and "Volume Two" (2007). This is the result. Six patterns, strict ratio checks, PRZ rendered as a real zone with outlier filtering, embedded AB=CD validation, and a 0-10 score that reflects how clean the geometry actually is. What it detects Gartley — B at 0.618 XA, D at 0.786 XA Bat — B around 0.5, D at 0.886 Alt Bat — B shallow (0.382), D at 1.13 (extends past X) Butterfly — B at 0.786, D at 1.272 Crab — B around 0.5, D at 1.618 Deep Crab — B at 0.886, D at 1.618 Three tolerance presets (Strict / Standard / Lenient) control how forgiving the ratio checks are. Standard uses tolerances close to what Carney published; Lenient widens by ~40% for charts where you want to see more candidates; Strict is for when you only want near-perfect geometry. What's actually different about this one PRZ as a zone, not a line. Most indicators draw D at a single Fibonacci level. Carney's actual methodology defines D as a Potential Reversal Zone — the convergence envelope of multiple projections (0.786 XA, 1.27 BC, 1.618 BC, AB=CD for Gartley; different sets per pattern). HAV computes that zone, filters outliers more than 3 ATR from the median projection, and draws the resulting box. When the zone is tight (projections converge), the score goes up. When it's wide, the score goes down. This is information you actually need before deciding whether to trade the pattern. Embedded AB=CD validation . Carney is pretty firm in the books: a harmonic pattern without an AB=CD that lands inside the PRZ is incomplete. HAV checks this explicitly and applies a -2 score penalty when the AB=CD doesn't converge. Patterns missing this convergence get a ⚠ icon on the label so you can see at a glance which ones are textbook vs. which ones are partial. 0-10 quality score combining ratio precision (how close B and D are to their ideal Fibonacci levels), PRZ tightness (how narrow the convergence zone is relative to ATR), and confluence count (how many projections actually landed inside the zone). The default `Min Score` filter is 6, but you can raise it for higher-conviction-only scanning or lower it to see more candidates. Confirmed-only display by default . No "forming" patterns that disappear when D doesn't print where projected. When HAV draws a pattern, the geometry is locked in. There's an opt-in **Borderline mode** that shows patterns scoring 4.0-5.9 with dashed lines and a (B) prefix on the label — useful for confluence with other tools or for educational purposes, but these never trigger alerts. Diagnostics table showing exactly what the engine is doing: how many 5-pivot windows it tested, where each gate filtered candidates (direction / structure / XA size / each ratio band / confluence / score), how many of each pattern type were accepted. If you're wondering "why didn't HAV draw a Gartley on this chart that I can see with my eyes," the diagnostics will usually tell you which gate it failed. Alerts Two ways to get alerted when something fires. Unified alert with JSON payload — set up one alert on "Any alert() function call" and you'll get structured JSON when any pattern of any direction confirms. The payload includes ticker, timeframe, pattern type, direction, score, AB=CD convergence status, PRZ top and bottom, all four ratios, and the prices and timestamps of all five pivots. Plug it into a webhook for Telegram, Discord, your own backend, whatever. This is what I use for scanning many charts at once and routing everything to a single notification stream. 12 named alert conditions — bullish/bearish × 6 patterns. If you just want "alert me on Crab patterns on this one chart" without messing with webhooks, these show up in TradingView's standard alert dialog. Both fire on bar close only. No repainting. Honest expectations on signal frequency Harmonic patterns are rare on any single chart. Like, actually rare. Across my testing: Daily timeframe, you might get 1-4 patterns per year on a single instrument 4H, maybe 5-15 patterns per month Lower TFs (5m, 15m), dozens per week This is by design — strict ratio checking filters out most of the 5-pivot zigzags that other indicators happily call "harmonic patterns." If you put HAV on one daily chart and stare at it for a week expecting signals, you will be disappointed. The way this thing actually shines is across many charts at once. Drop it on 30+ instruments across daily and 4H, set up the unified JSON alert, route to a Telegram channel or Discord webhook, and let the patterns come to you. That's the workflow it's built for. What it is and isn't It is: a pattern detection and verification tool. A confluence/confirmation aid for traders who already have a setup and want to know if a harmonic pattern is also forming there. A teaching tool — the diagnostics show you exactly what's happening at every step. It isn't: a complete trading system. There are no entry signals, no SL/TP automation, no win-rate claims. The decision to trade a pattern is yours, and Carney's books contain the actual entry/management methodology if you want to follow it strictly. Settings worth knowing about Tolerance Preset — start with Standard. If you're seeing too few patterns, try Lenient. If you're seeing too many low-quality ones, try Strict. Min Score — default 6 keeps things clean. Drop to 4-5 if you want to see borderline geometry. Raise to 7-8 for highest-conviction-only. Show Borderline Patterns — opt-in. Adds dashed/dimmed display for patterns that scored 4.0-5.9. Doesn't trigger alerts. Log Scale — default Off. Carney's books and most charting tradition use linear-scale Fibonacci. If you're working on heavy long-term crypto charts where price moved by orders of magnitude, you might prefer "On" or "Auto." S how Diagnostics Table — default On. Shows the detection statistics in the top-right. Toggle off if it's in the way of other indicators. Show Distribution Stats — opt-in addition to the diagnostics. Useful if you're calibrating tolerances yourself or curious about an asset's natural retracement profile. Patterns that aren't included I deliberately didn't add Cypher, Shark, or 5-0 in this version. Cypher (Oglesbee) uses a completely different structural approach than the Carney patterns and didn't fit cleanly into the same scoring framework. Shark and 5-0 use OXABC labeling with C as the entry rather than D, which would have meant a parallel detection engine. Maybe in v1.1 if there's demand. The six patterns above cover the bulk of what shows up in real markets anyway. Source notes If you want to read the actual methodology this is implementing, the references are: Scott M. Carney, "The Harmonic Trader" (1999) — the original self-published book where the framework first appeared, including the PRZ concept and the 0.886 retracement Scott M. Carney, "Harmonic Trading Volume One" (2004, 2nd ed. 2010) — the formal Pearson/FT Press treatment, Bat pattern, ideal Gartley ratios, AB=CD requirements Scott M. Carney, "Harmonic Trading Volume Two" (2007, 2nd ed. 2010) — Crab, Alt Bat, 5-0, RSI BAMM execution model, advanced patterns Scott M. Carney, "Harmonic Trading Volume Three: Reaction vs Reversal" (2016) — execution refinement, Harmonic Strength Index, additional management strategies H.M. Gartley's original 1935 "Profits in the Stock Market" is where the Gartley pattern itself was first described, but the specific Fibonacci ratios (0.618 / 0.786) were Carney's contribution decades later — Gartley used different proportions. Feedback, bug reports, "this thing didn't draw a pattern that's clearly there" reports — all welcome in the comments. I'll be running this myself across crypto, forex, and indices, and the feedback loop is genuinely how this gets better. The Good, the Bad and the Bitcoin
Pine Script® indicator
by GoodBadBitcoin
Liquidity sweep Strong Levels Only═══════════════════════════════════════════════════════════ LIQ · STRONG LEVELS ONLY — Smart Money Liquidity Filter BSL / SSL / EQH / EQL | Strength Filter | Touch Counter ═══════════════════════════════════════════════════════════ ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT THIS INDICATOR DOES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Most liquidity indicators flood your chart with every swing high and low — leaving you guessing which levels actually matter. This indicator solves that problem. It shows ONLY the levels where institutional stop hunts are still likely — levels where the stop-loss pool is still full, untouched, and worth hunting. Weak and stale levels are automatically hidden or removed. Every visible level on this chart is one that passed two filters: 1. Price moved significantly away after the level formed → confirms institutional participation 2. Price has not returned to test it more than once → confirms stop-loss pool is still intact EQH · BSL and EQL · SSL (Equal Highs / Equal Lows) are always shown regardless of filters — they are PRIMARY levels where the largest stop clusters accumulate. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ THE SMART MONEY CONCEPT BEHIND IT ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Retail traders place their stop losses: → Below swing lows (these become SSL — Sell-Side Liquidity) → Above swing highs (these become BSL — Buy-Side Liquidity) Institutions need these stop-triggered orders to fill their own large positions at favorable prices. They deliberately engineer price to sweep these levels before reversing. This indicator tracks exactly where those stop pools sit, how fresh they are, and warns you before you enter a trade against an unswept level that will hunt your stop first. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT YOU SEE ON THE CHART ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 🔵 BSL ★ Buy-Side Liquidity — strong, untouched Stop losses sitting above this swing high 🔴 SSL ★ Sell-Side Liquidity — strong, untouched Stop losses sitting below this swing low 🟡 EQH · BSL Equal Highs — PRIMARY level (always shown) Largest buy-side stop cluster 🟡 EQL · SSL Equal Lows — PRIMARY level (always shown) Largest sell-side stop cluster SSL ★ (1T) Level has been tested once — weakening Fewer stops remain, use with less conviction ✓ BSL / ✓ SSL Level has been swept (faded dashed line) Stop hunt completed — no longer relevant 🟠 Candle BG Sweep candle — a level was swept this bar Every label also shows the live pip distance from current price so you can apply distance-based entry rules instantly. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE IT — STEP BY STEP ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ STEP 1 — Read the levels around current price Look above → nearest BSL ★ or EQH · BSL This is the draw on liquidity for longs This is the danger zone for shorts Look below → nearest SSL ★ or EQL · SSL This is the danger zone for longs This is the draw on liquidity for shorts STEP 2 — Apply the distance rule before entering If an opposing level is within 15–20 pips of your entry: → DO NOT enter yet → Wait for price to sweep that level first → Then look for your entry signal after the sweep If an EQL · SSL or EQH · BSL exists in any direction: → ALWAYS wait for the sweep regardless of distance → These are the highest priority levels on the chart STEP 3 — Confirm the sweep A valid sweep looks like: → Price wicks BELOW the SSL (or above the BSL) → The candle CLOSES back above the SSL (or below BSL) → The sweep candle highlight fires (orange background) → The level changes to ✓ SSL (faded dashed line) A close below the level = not a sweep, it is continuation Do not enter — wait for the next SSL below STEP 4 — Enter after sweep confirmation After a valid SSL sweep on your HTF (15M recommended): → Drop to your entry timeframe (1M recommended) → Wait for a Break of Structure (BOS) to the upside → Enter at your preferred Fib level (0.21 entry, 0.705 TP) → SL below the sweep wick with buffer → TP at the next BSL or EQH · BSL above ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ RECOMMENDED SETUP FOR SMC TRADERS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 15M chart → Add this indicator for HTF level context Use it to identify draw on liquidity and danger zones before every trade 1M chart → Add the companion HTF version of this indicator (LIQ · 15M on 1M) to see 15M levels directly on your entry timeframe without switching charts Best pairs: EUR/USD · GBP/USD · GBP/JPY · USD/JPY Best session: London–New York overlap produces the cleanest sweeps and highest follow-through ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ SETTINGS GUIDE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⚙️ Core Settings Lookback Length (default 106) How many bars back the indicator tracks levels. 106 is the optimal value for intraday swing detection. Increase to 200+ for higher timeframe swing analysis. Swing Pivot Bars (default 5) Left and right bars required to confirm a swing. 5 = standard SMC swing detection. Lower = more sensitive (more levels, more noise). Higher = only major swings (fewer, stronger levels). EQH / EQL Tolerance % (default 0.030) How close two highs or lows must be to qualify as equal. 0.030% works well for EUR/USD and GBP/USD. Increase slightly for JPY pairs. Line Extension How far right the level lines extend. 🎯 Strength Filter (the key settings) Min Move Away — default 10 pips Price must move at least this many pips away from the level immediately after it forms. Levels with weak moves are hidden — they lack institutional participation. EUR/USD → 10 pips GBP/USD → 12 pips GBP/JPY → 20 pips Max Touches Before Invalid — default 1 How many times price can approach a level without sweeping before it is automatically removed. 1 = strictest (recommended) — first touch weakens, second touch invalidates 2 = lenient — gives levels a second chance Touch Zone — default 3 pips How close price must come to count as a touch. 3 pips catches genuine approaches while ignoring noise. Increase to 5 pips if you find levels disappearing too fast. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ INFO PANEL (top right of chart) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ BSL Active → How many strong buy-side levels remain SSL Active → How many strong sell-side levels remain BSL Swept → Total buy-side levels swept this session SSL Swept → Total sell-side levels swept this session BSL Invalidated → Levels removed by touch filter (too stale) SSL Invalidated → Levels removed by touch filter (too stale) Sweep Now → YES if a sweep just occurred this bar ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ALERTS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Three alerts available (set via TradingView alert menu): → Strong BSL Swept — buy-side level swept, watch for short → Strong SSL Swept — sell-side level swept, watch for long → Strong Level Swept — either direction swept These alerts only fire on STRONG levels that passed the filter — no noise from weak or stale levels. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ COMMON MISTAKES TO AVOID ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ✗ Entering a long while an SSL ★ sits within 15–20 pips below → Price will sweep it first and hit your stop ✗ Ignoring an EQL · SSL because it looks far away → Equal lows are always magnets — distance does not matter ✗ Treating a (1T) level the same as a fresh level → Touched levels have fewer stops — react with less force ✗ Entering immediately when the sweep candle fires → Wait for the BOS confirmation on your entry timeframe ✗ Using this indicator alone without HTF structure bias → Always confirm the sweep aligns with your HTF direction ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ THE CORE PRINCIPLE ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Every candle is either building a liquidity pool, hunting a liquidity pool, or delivering away from a swept pool. Your job is to identify the pool, wait for the hunt to complete, and enter during the delivery. This indicator shows you exactly where the pools are and whether they are still worth hunting. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Built for SMC / ICT traders operating on EUR/USD, GBP/USD, GBP/JPY and USD/JPY on 1M–15M timeframes. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Pine Script® indicator
by Jeswin7709
SMVD Ultra Clean SniperUltra Clean Sniper is a trend-following indicator designed to provide clear Buy and Sell signals using EMA, VWAP, candle strength, and momentum confirmation. Features: Buy and Sell signals on chart Trend direction filter EMA 9 and EMA 44 support VWAP confirmation Strong candle detection Useful for intraday, scalping, and swing trading Best Timeframes: 3m, 5m, 15m, 1H Best Markets: NIFTY, BANKNIFTY, Stocks, Forex, Indices How to Use: Take Buy signals only in uptrend Take Sell signals only in downtrend Use stop loss below previous swing low/high Combine with risk management This script is for educational purposes only and does not guarantee profits.
Pine Script® indicator
by smvdtravelsolutions
Reversal Confirmation Planner [AGPro Series]Reversal Confirmation Planner 🧠 Core Idea Is a reversal actually confirming, or is it still only an early reaction? 📌 Overview / What it does Reversal Confirmation Planner is a chart-first planning tool built to separate early reversal reactions from structured confirmation context. The script detects sweep or wick-rejection reactions around recent swing references, then evaluates whether the reaction develops into a cleaner confirmation plan. It maps a confirmation pocket, invalidation edge, target-room band, compact event labels, alerts, and a clean AG Pro decision panel. It does not predict reversals, automate entries, or scan every classical reversal pattern. The goal is to help traders organize the confirmation phase: reaction quality, confirmation close, momentum turn, volume support, room, invalidation, and next action. 🎯 Purpose & Design Philosophy This script was built for traders who do not want to treat every wick, sweep, or counter-move as a valid reversal. Many reversal tools mark the first reaction. This planner waits for structure. It asks whether price has moved from reaction into confirmation, whether momentum is turning, whether volume supports the shift, and whether the active plan has enough room before the next projected guide. The design supports a decision-making workflow. It does not ask the user to chase every signal. It helps the user decide whether the reversal context is still early, building, confirming, confirmed, failed, expired, or already testing its room. ⚡ Why This Script Is Different Most reversal tools focus on detecting a pattern, labeling a wick, or marking every possible counter-trend reaction. This script does NOT behave like a broad reversal-pattern scanner, double-top/double-bottom detector, head-and-shoulders module, 1-2-3 map, wedge detector, Turtle Soup map, liquidity sweep tool, or generic support/resistance zone script. Instead, it works as a confirmation planner. The core workflow is reaction → confirmation pocket → invalidation edge → target-room context → next-action state. This keeps the public concept narrow, useful, and clearly separate from other AGPro reversal tools. ⚙️ Methodology 1. Context Detection The script watches for bullish or bearish reversal reactions using sweep behavior, wick rejection, candle close location, and prior directional context. 2. Reference Mapping Once a reaction qualifies, the planner creates a confirmation line, confirmation pocket, invalidation edge, and target-room guide. 3. Reaction Evaluation The model scores sweep or rejection quality, confirmation progress, momentum turn, volume support, and available room. 4. Visual Output The chart shows the active confirmation pocket, centered target-room band, risk/target guide lines, compact labels, alert conditions, and an AG Pro panel with the current decision state. 🗺️ How to Read the Chart Confirmation Pocket = the area between the reaction reference and the confirmation close line. Invalidation Edge = the level beyond the reaction extreme where the active confirmation plan is considered failed by the script rules. Target-Room Band = a projected planning zone that shows whether the reversal has enough forward room relative to the active risk distance. Labels = compact state markers such as REACTION, CONFIRMING, CONFIRMED, FAILED, EXPIRED, ROOM TESTED, or PLAN. Colors = teal supports bullish reversal planning, pink supports bearish reversal planning, amber marks developing context, indigo marks target-room context, and red marks invalidation or failed confirmation. Panel = summarizes Reversal Stage, Confirmation Score, Invalidation, Room, and Action. 🚦 Signals & States • REACTION → an early sweep or rejection is active, but confirmation is not complete. • BUILDING → the context is improving, but the confirmation close is not fully qualified. • CONFIRMING → price is testing or closing through the confirmation line with sufficient structure to review. • CONFIRMED → the confirmation score and close behavior meet the script threshold. • ROOM TESTED → the projected target-room guide has been reached after confirmation. • FAILED → the active plan violated its invalidation edge. • EXPIRED → the reaction did not confirm within the selected confirmation window. 🔔 Alerts Logic The script includes alerts for bullish reaction, bearish reaction, bullish confirmation, bearish confirmation, failed confirmation, and high-quality confirmation. Alerts trigger when the internal rule conditions are met. They are attention markers for chart review, not trade instructions, automated entries, or guaranteed reversal signals. 🧩 Confluence Logic The strongest confirmation context appears when multiple layers align: • A clear sweep or rejection reaction forms. • Price progresses through the confirmation pocket. • Momentum begins to turn in the reaction direction. • Volume support is not weak. • The target-room band offers enough room relative to invalidation distance. When these layers align, the confirmation score becomes stronger. When one or more layers are weak, the state usually remains reaction, building, expired, or failed. 📊 When to Use • After visible sweep or rejection behavior. • During possible reversal transitions after directional extension. • Around swing references where confirmation matters more than the first wick. • 4H swing-review charts, where the default label spacing and confirmation pockets usually have the cleanest visual balance. • Daily charts when the user wants fewer but more selective reversal confirmation states. • In markets where traders want to compare reaction quality, invalidation, and room before acting. • For discretionary review of crypto, forex, indices, equities, and commodities on liquid charts. ⚠️ When NOT to Use • Extremely low-liquidity symbols with unreliable wicks or volume. • Very noisy micro-timeframes where reaction candles are unstable. • News spikes or extreme volatility events where confirmation levels can be crossed erratically. • Charts where the user expects a complete reversal-pattern scanner. • Situations where the user wants automated trade execution. 🎛️ Key Inputs • Confirmation Mode → controls whether labels and alerts wait for bar close or update live. • Swing Reference Length → defines the recent swing references used for sweep-based reactions. • Sensitivity → adjusts how selective the reaction model is. • Confirmation Window Bars → limits how long a reaction can wait for confirmation. • Minimum Reaction Score → controls the quality required before tracking a candidate. • CONFIRMED Threshold → controls the minimum 0-100 score required for confirmed state. • Preferred Room / Risk → adjusts how much forward room is preferred relative to invalidation distance. • Visual settings → control pockets, bands, guide lines, labels, panel position, panel theme, and font sizes. 🖥️ Interface & Visual Design The interface is built around a premium chart-first workflow. The confirmation pocket and target-room band are concept-native visuals, not generic support/resistance zones. Their labels are centered inside the boxes for cleaner chart reading. The default visual preset is tuned for 4H-style swing review: enough labels to keep the chart informative, but enough spacing to avoid a crowded reversal scanner look. The AG Pro panel uses a compact structure with one merged blue title row and five decision rows. It is designed to show only the current planning context without turning the chart into a dashboard-heavy script. 🧪 Practical Usage Workflow 1. Read the panel state. 2. Check whether the chart is showing REACTION, BUILDING, CONFIRMING, CONFIRMED, FAILED, or EXPIRED. 3. Review the confirmation pocket and invalidation edge. 4. Compare target-room context against the room/risk readout. 5. Use alerts as review prompts, not as trade instructions. 🔍 Interpretation Guidelines Treat the first reaction as incomplete information. A higher score means the reaction has developed more confirmation structure according to the script rules. It does not mean the reversal must continue. A failed or expired state is also useful information. It tells the user that the reaction did not confirm cleanly under the selected rules. 🚫 What This Script Is NOT • Not a prediction engine. • Not financial advice. • Not auto trading. • Not guaranteed signals. • Not a broad reversal-pattern scanner. • Not a full liquidity sweep system. • Not a generic support/resistance zone tool. ⚠️ Limitations & Transparency All outputs are rule-based and depend on the selected inputs, timeframe, and symbol behavior. Swing references confirm with natural delay. Wick structure can be noisy on low-liquidity symbols. Volume quality varies across markets. Fast volatility can cause reactions to confirm and fail quickly. The confirmation score is an internal comparison model. It is useful for reading this script's framework, but it is not an objective probability model. 🧠 Market Context Notes Reversal confirmation is strongest when price reacts from a meaningful extension, then follows through with cleaner close behavior and improving participation. The script is intentionally focused on the confirmation phase. It does not attempt to map every higher-timeframe structure, order block, fair value gap, harmonic pattern, or reversal formation. 🧾 Use Case Examples When price sweeps below a recent swing low, closes back above it, then starts progressing through the confirmation pocket, the planner may shift from REACTION to BUILDING or CONFIRMING. When price confirms but the room/risk readout is weak, the user can see that the reversal may be structurally less attractive inside this framework. When price violates the invalidation edge before confirmation, the planner marks the context as FAILED instead of leaving the reaction visually ambiguous. 🧱 System Philosophy The AGPro approach is to build decision engines, not decorative signal boards. This script focuses on one clear question: did the reversal reaction earn confirmation, or is it still only a reaction? 🔐 Non-Promise Statement No script can confirm future price movement with certainty. This tool provides structured context, not guarantees. 📉 Risk Disclosure Trading involves risk. This script is for educational, analytical, and chart-review purposes only. It does not provide financial advice, investment advice, or guaranteed trading outcomes. Users remain responsible for their own decisions, risk management, position sizing, and broader market analysis. 📚 Educational Note Use the planner to study how reactions mature, fail, expire, or confirm under consistent rules. The value is in disciplined interpretation, not in treating any single label as a complete trading system.
Pine Script® indicator
by AGProLabs