Get started

Indicators and strategies

Quantum Momentum Wave [Pineify]Quantum Momentum Wave Quantum Momentum Wave is a signed peak-momentum oscillator paired with a Kaufman-style adaptive filter. Instead of measuring the net change from one point to another, the wave scans the full lookback window and returns the largest absolute price displacement with its original sign. The wave is linearly smoothed and then tracked by an adaptive signal line, so entry markers fire on context-filtered reversals rather than every momentum flip. Key Features Signed peak-momentum engine that isolates the strongest move inside the lookback Linear regression smoothing to tame the step-change behavior of raw peak readings Adaptive signal line that speeds up when the wave is stretched and slows down in noise Zone-filtered BUY and SELL markers that only fire when the wave is past zero in the opposite direction Gradient fill between the wave and zero — bullish above, bearish below Alerts for reversal setups and for zero-line regime shifts How It Works The core function is a QMW scan. On each bar it walks the last Momentum Lookback bars, computes price minus each historical bar, and keeps the comparison that produced the largest absolute change. It returns that value with its original sign. So a -6 reading means the single strongest move inside the window was a 6-unit drop, even if the bar-to-bar change right now is small. Raw peak readings step when a new candle takes over as the dominant move, so the output is passed through linear regression over the Signal Smoothing length. LR fits a straight line through the recent raw values and returns its endpoint, preserving signed direction while cutting short-term jitter. The adaptive signal runs a Kaufman-style update on top of the smoothed wave. Its coefficient is the ratio of the wave's absolute value to the sum of its recent absolute one-bar changes. When momentum is clearly extended and directional, the ratio is high and the signal follows quickly. When the wave oscillates near zero, the ratio collapses and the line nearly freezes. How the Components Work Together Three layers combine into one output. The peak scan answers how hard has price moved inside the window, not just where it ended. Linear regression answers what is the underlying direction of the peak reading after filtering out one-bar swaps between competing peak bars. The adaptive signal answers when has that direction actually shifted by providing a responsive reference line. Entries layer a location filter on top. A crossover only qualifies when the wave is on the opposite side of zero — buys look for the wave turning up while stretched below zero, sells for the wave rolling over while stretched above it. Crosses near the midline are ignored because they tend to be low-conviction flips without prior displacement, so the setup is biased toward reversals from extended states rather than trend-chasing entries. Trading Ideas and Insights BUY triangles below zero can flag exhaustion of a downside push and a possible rotation back toward the mean SELL triangles above zero can flag fading upside strength after an extended rally Zero-line crosses act as broader regime markers; alerts on those can frame intraday bias During strong trends the wave may stay on one side of zero for many bars. Counter-trend BUY or SELL labels in that state often need extra confirmation from price structure or higher-timeframe context Signals are context aids, not standalone trade instructions. Past reactions at these conditions do not guarantee future ones. Unique Aspects The momentum calculation returns the peak signed displacement within the lookback, not a simple close-minus-close value. The reading stays elevated while the dominant move is still inside the window, which tracks the strongest displacement in memory rather than just endpoint delta The adaptive signal uses a non-standard variation of Kaufman's efficiency ratio — absolute wave value divided by total absolute wave travel — tuned for oscillator input rather than raw price Entry markers require both a crossover and a zone match. No label prints for a crossover that happens in the neutral zone around zero, which filters out the weakest setups How to Use Add the indicator to the chart and start with the defaults. The thicker line is the Quantum Wave; the fainter line is the Adaptive Signal Read the wave color and the gradient fill to see which side of zero the wave is on and how stretched it is Watch for BUY triangles when the wave is clearly below zero and turning up through the signal line Watch for SELL triangles when the wave is clearly above zero and turning down through the signal line Configure alerts for buy, sell, or zero-cross conditions if you want notifications outside the chart Customization Source Data (default: close) — Price series used for the peak momentum scan Momentum Lookback (default: 14) — Window size for the peak displacement scan. Higher values capture broader swings; lower values react faster Signal Smoothing (default: 9) — Linear regression length applied to the raw wave. Higher values produce a cleaner line with more lag Bullish Color / Bearish Color — Wave color in positive and negative territory, and the BUY/SELL marker colors Adaptive Signal Color — Color of the adaptive reference line; a subtle contrast against the wave usually reads cleanest Limitations Linear regression smoothing introduces a small amount of lag. On fast reversals the wave can reach the crossover a few bars after price has already moved Because the adaptive ratio uses the wave's own value, very small wave readings near zero make the signal line nearly freeze. This is deliberate but means the reference reacts slowly while momentum is mild Mean-reversion style BUY and SELL labels can occur repeatedly during strong trends. Pair them with price structure or higher-timeframe bias instead of using them in isolation Conclusion Quantum Momentum Wave is for traders who want an oscillator that reflects the strongest recent move rather than the endpoint delta. Its value comes from the combination of peak-momentum measurement, linear regression smoothing, and an adaptive reference line that only produces labels when the wave is both stretched past zero and visibly turning back.
Pine Script® indicator
by Pineify
EMA + MACD + RSI Confluence StrategyEMA + MACD + RSI Signalq Confluence StrategyEMA + MACD + RSI Confluence 波段策略（BTC 4H 专用） 这是一个简单实用的多指标共振策略，适合 BTC 4小时波段交易。 核心逻辑： - 使用 EMA 9/20 判断趋势 - MACD 确认动量 - RSI 过滤假信号（>50 做多，<50 做空） 适用场景： - BTC 4小时图 - 趋势行情中表现较好 - 适合中线波段（持仓几天到两周） 参数说明： - Fast EMA: 9 - Slow EMA: 20 - MACD: 12,26,9 - RSI: 14，阈值 50 使用建议： 建议配合日线趋势过滤使用，仅在日线多头时做多，日线空头时做空。 风险提示：仅供学习参考，实盘请严格做好风控。
Pine Script® strategy
by txts0370
maXXit SoC/TP [V1.0]maXXit SoC/TP — Stop on Close & Take Profit Sends a JSON webhook alert as soon as N consecutive candles close through a configured Stop Loss or Take Profit level. No intrabar triggering — based exclusively on the bar's closing price. ───────────────────────────────────── FEATURES ───────────────────────────────────── • Stop Loss and Take Profit configurable independently (0 = disabled) • Configurable number of closes required (1–3) before the alert fires • JSON webhook format compatible with IBKR (FUT/STK) and CFD brokers (OANDA, IG Markets) • Built-in instrument mapping: MNQ, MES, MYM, FXXP, FSXE, MGC, MCL, MNG, MHG, ZW, ZN, 10Y, EURUSD • Lock to Symbol: indicator stays locked to the configured instrument across symbol changes • Fires exactly once per level — re-arms automatically when the price is changed • Red dashed line = Stop Loss | Green dashed line = Take Profit | Gray = triggered ───────────────────────────────────── SETUP ───────────────────────────────────── 1. Add the indicator to your chart 2. Account & Broker: configure Webhook Secret, Account ID and Trade Type (FUT / STK / CFD) 3. Stop on Close: set Direction, Stop Price, TP Price, Quantity and Closes required 4. Lock to Symbol: enter the ticker prefix once (e.g. FXXP, MNQ) → A hint label on the chart shows the recommended value while this field is empty 5. Create a TradingView alert: → Condition: maXXit SoC/TP → Any alert() function call → Notifications: enter your Webhook URL → Click Create The alert then runs entirely server-side — regardless of whether TradingView is open in the browser. ───────────────────────────────────── NOTES ───────────────────────────────────── Orders are sent as MKT with IOC (Immediate or Cancel) and outsideRth = true. Webhook format and instrument parameters are compatible with the maXXit EMA V6 system.
Pine Script® indicator
by maxxit007
FT - Volume IndicatorFT - VOLUME INDICATOR A multi-condition volume and range analysis tool that highlights six distinct market behaviors by painting vertical background columns behind qualifying candles. Designed to help traders visually identify institutional activity, absorption zones, breakouts, and dead zones at a glance — without cluttering the chart with arrows or labels. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ WHAT MAKES IT DIFFERENT ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Most volume indicators show only one dimension: "high volume" or "low volume". This indicator cross-references volume with candle range, producing six distinct contextual signals instead of one. The combination reveals the INTENT behind the volume, not just its magnitude. For example, a candle can have abnormally high volume but a tiny range — that is classic absorption (large orders being absorbed without moving price). A different candle can have high volume AND expanded range — that is impulsive directional movement. These two behaviors look identical to a basic volume indicator but mean completely opposite things. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ THE SIX CONDITIONS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1) HIGH VOLUME Volume exceeds the N-period SMA multiplied by a configurable factor. Marks candles with abnormal trading activity without range context. 2) HIGH VOLUME + SMALL CANDLE (ABSORPTION) High volume combined with a range SMALLER than the average range. Indicates strong orders being absorbed at a level. Classic signal at supports and resistances where institutional players defend price. 3) HIGH VOLUME + LARGE CANDLE (IMPULSE) High volume combined with a range LARGER than the average range. Indicates aggressive directional movement: breakouts, news reactions, and trend initiations. 4) LOW VOLUME Volume well below the SMA divided by a configurable factor. Identifies periods of reduced participation and consolidation. 5) LOW VOLUME + LARGE CANDLE (WEAK MOVE) Low volume combined with a large range. Warning signal: price is moving without real participation. Often precedes reversals or indicates manipulated/thin-liquidity moves. 6) LOW VOLUME + SMALL CANDLE (DEAD ZONE) Low volume combined with a small range. Identifies dead zones, lunch-hour consolidations, and low-liquidity periods where trading is generally avoided. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ CALCULATION METHOD ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - Volume reference: Simple Moving Average of volume over N bars (configurable per condition). - Range reference: Simple Moving Average of (High - Low) over N bars (configurable per condition). - High volume trigger: volume >= avgVolume × multiplier - Low volume trigger: volume <= avgVolume ÷ divisor - Small candle trigger: range <= avgRange × maxRangeFactor (default 0.8) - Large candle trigger: range >= avgRange × minRangeFactor (default 3.0) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ PRIORITY LOGIC ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ When a candle satisfies multiple conditions simultaneously, the most specific one prevails. The priority order is: 3 (High Vol + Large) > 2 (High Vol + Small) > 1 (High Vol) > 5 (Low Vol + Large) > 6 (Low Vol + Small) > 4 (Low Vol) This prevents a breakout candle (condition 3) from being painted as just "high volume" (condition 1), preserving the most meaningful interpretation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ FEATURES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - Each of the 6 conditions can be independently enabled/disabled. - Fully customizable colors for each condition. - Adjustable parameters per condition: SMA length, multipliers, divisors, and range thresholds — allowing fine-tuning for any asset or timeframe. - Time filter with configurable GMT offset: restricts painting to a specific trading session (e.g., US session, Asian session). - Vertical background columns instead of candle painting: keeps candlestick colors intact for reading price action clearly while still highlighting the volume context. - Six independent alerts (one per condition) for real-time notifications. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ HOW TO USE IT ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - SCALPING: Watch for absorption (condition 2) at key supports/resistances to anticipate reversals. A small candle with large volume at a level often signals that larger players are positioning before the move. - BREAKOUT TRADING: Only consider breakouts confirmed by condition 3 (high volume + large range). Breakouts without volume expansion are statistically prone to fail. - TREND CONTINUATION: Multiple consecutive condition 3 candles in the same direction confirm institutional alignment. - FADE / REVERSAL: Condition 5 (low volume + large range) warns of unsustainable moves. Combined with exhaustion signals from other tools, it can signal reversal opportunities. - FILTERING: Condition 6 (dead zones) helps avoid taking trades during unproductive periods. Some traders pause strategies entirely when condition 6 dominates the recent price action. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ RECOMMENDED CONFIGURATION ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Default values are calibrated for active intraday assets (NQ futures, BTC, major forex pairs on 1m-15m timeframes). For less volatile assets or higher timeframes, consider: - Lowering the HIGH VOLUME multipliers (3 → 2). - Increasing SMA lengths for smoother references. - Adjusting range thresholds based on ATR of the specific asset. All parameters are fully configurable to adapt to any asset and timeframe. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ NOTES ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ - This indicator is a context/confluence tool, not a standalone trading system. It identifies market behaviors but does not generate buy/sell signals on its own. - Works best when combined with structural analysis (support/resistance, trendlines, or tools like VWAP and EMAs). - Volume data quality depends on the data provider — some brokers report volume differently (tick volume vs. real volume).
Pine Script® indicator
by FrancoTradingFT
QWF Trailing Signals# QWF Trailing Signals ## Overview This indicator combines three powerful technical concepts into a single, clean visual tool: 1. **Quadratic Weighted Filter (QWF)** — a smoothing algorithm that gives exponentially more weight to recent price action 2. **ATR-based trailing stop** — provides the dynamic trend line that adapts to market volatility 3. **Deviation bands** — four-tier volatility channels around the QWF baseline for identifying price extremes ## Key Features ### 🎯 Dynamic Color-Changing Trend Line The main trend line shifts color based on a separately-calculated trend filter, preventing the "color flickering" common in single-ATR systems: - **White**: Confirmed uptrend - **Orange**: Confirmed downtrend Color changes only after N consecutive bars confirm the new direction, filtering out noise during consolidation. ### 📊 Five-Layer Deviation Bands Built on a QWF baseline with standard deviation multipliers: - Upper Deviation (outer band) - Upper Mid Deviation - QWF Central Line - Lower Mid Deviation - Lower Deviation (outer band) These bands expand and contract with market volatility, highlighting overextension zones. ### 🔔 Trend Reversal Alerts Built-in alert conditions fire when confirmed trend direction flips, with a minimum-bars filter to prevent signal spam during choppy markets. ### 📍 Optional TP/SL Visualization Toggle on-chart take-profit and stop-loss levels displayed as horizontal lines for the most recent signal, with configurable percentages. ## How It Works The script maintains two independent trailing systems running in parallel: **1. Line Position System** — uses a short QWF period and tight ATR multiplier to keep the trend line hugging price action closely. This gives responsive, step-like movement that tracks the market in real time. **2. Color Filter System** — uses a longer QWF period and wider ATR multiplier with a consecutive-bar confirmation requirement. This determines whether the line appears in uptrend (white) or downtrend (orange) color. By separating these two systems, the indicator achieves something rare: a line that moves with price but only changes color on genuine trend shifts. ## Input Parameters ### Main - **Amplitude** (default: 30) — Controls band width relative to baseline ### QWF Settings - **Peariod** (default: 60) — Base period for QWF calculations - **Sec777** (default: 8) — Divisor for the fast QWF period - **QWF Length** (default: 80) — Length for the deviation band baseline - **Deviation Length** (default: 80) — Lookback for standard deviation - **Multiplier** (default: 2.0) — Band width multiplier ### Trailing Stop - **Trailing ATR Multiplier** (default: 2.0) — Distance of trend line from price - **ATR Period** (default: 14) — ATR calculation period ### Trend Filter (Color) - **Trend ATR Multiplier** (default: 3.5) — Higher = less frequent color changes - **Trend Confirmation Bars** (default: 3) — Bars needed to confirm direction change ### Signal Filter - **Minimum Bars Between Signals** (default: 50) — Prevents over-trading ### Risk Management - **Take Profit %** (default: 1.0) - **Stop Loss %** (default: 1.0) - **Show TP/SL Lines** (default: off) ## How to Use ### Trend-Following Strategy 1. Wait for the trend line color to change (white → orange or vice versa) 2. Enter in the direction of the new color after the next candle closes 3. Use the opposite outer deviation band as a dynamic stop-loss reference 4. Exit when the trend line color flips back ### Mean-Reversion Strategy 1. When price touches the outer deviation bands, watch for reversal signals 2. Use the middle QWF line as a target for counter-trend entries 3. Confirm with trend line color — only take longs when line is white, shorts when line is orange ### Best Practices - Works across all timeframes but best tuned for 1-minute to 1-hour charts - Increase "Trend ATR Multiplier" on lower timeframes to reduce whipsaws - Combine with volume or momentum indicators for higher-probability entries - Test parameter combinations on your specific instrument before live use ## Recommended Settings by Timeframe | Timeframe | Peariod | Trailing ATR | Trend ATR | Min Bars | |-----------|---------|--------------|-----------|----------| | 1 min | 60 | 2.0 | 3.5 | 50 | | 5 min | 40 | 1.8 | 3.0 | 30 | | 15 min | 30 | 1.5 | 2.5 | 20 | | 1 hour | 20 | 1.5 | 2.5 | 10 | | 4 hour | 14 | 1.2 | 2.0 | 5 | ## Notes - This indicator is designed for discretionary trading and strategy development, not as a standalone signal system - Past performance does not guarantee future results - Always combine with proper risk management and market context analysis - The QWF calculation is computationally intensive; expect slight delay on very long lookback periods ## Disclaimer This script is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Always do your own research and never trade with money you cannot afford to lose.
Pine Script® indicator
by nadelyss
RSI Divergence LinesHere is a professional and high-quality description in English that you can use to publish your RSI Divergence indicator on TradingView. You can copy and paste this directly into the publication description box. *** ### **Title: Smart RSI Divergence with Alerts (Regular & Hidden)** **Description:** **Overview** The **Smart RSI Divergence** indicator is a powerful technical analysis tool designed to automatically detect and plot both Regular and Hidden divergences between Price Action and the Relative Strength Index (RSI). Divergences are one of the most reliable leading signals in trading, offering early warnings of potential trend reversals (Regular Divergence) or trend continuations (Hidden Divergence). By automating this complex mathematical detection, this indicator saves you from manually drawing trendlines and helps you make objective, rule-based trading decisions. **Key Features** * **Automated Divergence Detection:** Instantly identifies both Bullish and Bearish divergences without the need for manual charting. * **Regular & Hidden Divergences:** * *Regular Divergence:* Signals a potential trend reversal (e.g., Price makes a Lower Low, but RSI makes a Higher Low). * *Hidden Divergence:* Signals a potential trend continuation (e.g., Price makes a Higher Low, but RSI makes a Lower Low). * **High-Accuracy Pivot points:** Uses advanced pivot detection algorithms to ensure divergence lines are drawn only on valid swing highs and swing lows. * **Clean Visuals:** Divergence lines are drawn directly on both the price chart and the RSI oscillator for clear, easy-to-read confirmation. Lines are rigorously validated to ensure they do not cross through the RSI curve. * **No Repainting:** The indicator waits for the candle to close before confirming and drawing the divergence, ensuring signals are permanent and do not flicker or repaint. * **Built-in Alerts:** Fully integrated with TradingView's alert system. Set up notifications for Overbought/Oversold divergences so you never miss a prime trading opportunity. **How to Use in Trading** 1. **Bullish Regular Divergence (Reversal):** Look for this at the bottom of a downtrend. Price creates a lower low, but RSI creates a higher low. This indicates bearish momentum is fading. Wait for a bullish candlestick confirmation to enter long. 2. **Bearish Regular Divergence (Reversal):** Look for this at the top of an uptrend. Price creates a higher high, but RSI creates a lower high. This indicates bullish momentum is exhausted. Wait for a bearish candlestick confirmation to enter short. 3. **Hidden Divergences (Continuation):** Use these in established trends. For example, in an uptrend, if price makes a higher low but RSI makes a lower low, it is a strong signal that the uptrend is preparing for its next leg up. 4. **Combining with other tools:** For the highest win rate, combine these divergence signals with strong Support/Resistance levels, Order Blocks, or Fair Value Gaps (FVG). **Settings & Customization** * **RSI Length:** Customize the lookback period for the RSI (Default is 14). * **Pivot Lookback (Left/Right):** Adjust the sensitivity of the swing high/low detection to suit your trading timeframe—lower values for scalping, higher values for swing trading. * **Visual Toggles:** Turn Regular or Hidden divergence displays on/off to keep your chart uncluttered. **Who is this for?** Whether you are a scalper, day trader, or swing trader, this indicator provides deep insights into underlying market momentum across all timeframes and assets (Forex, Crypto, Stocks, Indices). *Disclaimer: Divergences are powerful, but no indicator is 100% accurate. Always use proper risk management and do not use this indicator as your sole reason for entering a trade.* ***
Pine Script® indicator
by handi45
Risk Panel (RR Dropdown)**Risk Panel PRO — Trade Smarter, Not Harder** Turn your TradingView chart into a complete decision-making dashboard. This tool combines a precision risk calculator with a structured trading checklist, helping you stay disciplined, consistent, and in control — no matter your experience level. 🔹 **Instant Risk Clarity** Know exactly how much you’re risking on every trade with real-time percentage calculations. 🔹 **Structured Rule-Based Trading** Follow a clear checklist including session, bias, timeframe alignment, liquidity, stop placement, and risk-to-reward. 🔹 **Traffic Light Feedback System** Simple green/red signals let you instantly see if your setup meets your rules — no overthinking. 🔹 **Custom Risk-to-Reward Control** Quickly select between 1:1, 1:2, and 1:3 setups to maintain high-quality trades. 🔹 **Built for All Traders** Whether you’re just starting out or refining a professional system, this panel keeps your process clean and consistent. --- **Trade with confidence. Eliminate guesswork. Stick to your edge.**
Pine Script® indicator
by woodyoioiz7exv
Risk Panel (RR Dropdown)**Risk Panel PRO — Trade Smarter, Not Harder** Turn your TradingView chart into a complete decision-making dashboard. This tool combines a precision risk calculator with a structured trading checklist, helping you stay disciplined, consistent, and in control — no matter your experience level. 🔹 **Instant Risk Clarity** Know exactly how much you’re risking on every trade with real-time percentage calculations. 🔹 **Structured Rule-Based Trading** Follow a clear checklist including session, bias, timeframe alignment, liquidity, stop placement, and risk-to-reward. 🔹 **Traffic Light Feedback System** Simple green/red signals let you instantly see if your setup meets your rules — no overthinking. 🔹 **Custom Risk-to-Reward Control** Quickly select between 1:1, 1:2, and 1:3 setups to maintain high-quality trades. 🔹 **Built for All Traders** Whether you’re just starting out or refining a professional system, this panel keeps your process clean and consistent. --- **Trade with confidence. Eliminate guesswork. Stick to your edge.**
Pine Script® indicator
by woodyoioiz7exv
Market Pressure SuperTrend█ OVERVIEW Market Pressure SuperTrend is a trend-following indicator based on the classic SuperTrend, extended with dynamic adaptation driven by a market pressure oscillator (MPO – Market Pressure Oscillator). Its main function is to combine trend direction with momentum context. When the market enters overbought or oversold conditions, the ATR multiplier is temporarily reduced, allowing the trend line to react faster to price changes. The indicator maintains visual simplicity while adding an adaptive layer that improves timing compared to a standard SuperTrend approach. █ CONCEPT Trend-following indicators are often characterized by inherent lag. This delay comes from the way they smooth price data and react only after a move has already developed. The classic SuperTrend uses ATR as a volatility buffer, which provides stability but can delay reaction to fast market shifts. Market Pressure SuperTrend extends this model by incorporating momentum analysis through an internal oscillator (MPO). Instead of treating the ATR multiplier as a fixed parameter, the indicator: * detects overbought (OB) and oversold (OS) conditions, * temporarily reduces the ATR multiplier in those zones, * brings the trend line closer to price, increasing responsiveness. The adaptive mode is active for a limited time — up to 200 bars — or until a trend change occurs. After either condition is met, the indicator returns to its base ATR configuration. Additionally, adaptability depends not only on SuperTrend parameters but also on MPO settings: * shorter MPO length → more frequent OB/OS conditions → more frequent adaptation * longer MPO length → fewer signals → more stable trend behavior * higher smoothing → reduced noise → fewer but cleaner adaptive triggers This creates a hybrid model: trend (SuperTrend) + momentum (MPO) → adaptive market response. █ INPUTS SuperTrend: * ATR Length – period used for ATR calculation * Base ATR Multiplier – baseline distance of the trend line from price * OB/OS Sensitivity – strength of ATR reduction during adaptive mode Market Pressure Oscillator (MPO): * MPO Length – lookback period for pressure calculation * MPO Smoothing – EMA smoothing applied to oscillator * Overbought Level – upper threshold for momentum * Oversold Level – lower threshold for momentum Color Settings: * Color bars by trend – colors candles according to trend direction * Show SuperTrend Line – toggles trend line visibility * Use Gradient Fill – fills area between price and trend line * Show OB/OS Circles – marks OB/OS entries on chart * Uptrend / Downtrend Color – trend colors Overextension Signals: * Deviation Threshold (x ATR) – defines when price is considered extended from trend Info Table: * Show MPO + ATR Distance Table – enables info panel * Table Position – location of the table * Text Size – table font size TP/SL: * Show TP/SL Targets – enables trade levels * SL = ATR × instead of % – selects SL calculation method * ATR Period for TP/SL – ATR length for risk model * SL ATR Multiplier / SL % – stop loss size * TP1 / TP2 / TP3 RR – risk-reward targets TP/SL Display: * controls visibility of SL, TP1, TP2, TP3 levels █ TABLE The table provides real-time market and system context: Trend * Current SuperTrend direction (Bullish / Bearish) Momentum * MPO value and its direction of change Momentum Zone Current oscillator state: * Overbought * Oversold * Neutral — the range between OB and OS levels Adaptive Mode * Indicates whether ATR reduction is currently active due to MPO conditions ATR Distance * Distance between price and trend line expressed in ATR units * High values may indicate potential overextension █ APPLICATIONS The indicator is primarily designed for trend-following strategies, but its strength lies in adding momentum context and trade management functionality. The core application is directional trading based on trend confirmation. For example, if price breaks a key level (such as a local resistance), and: * the trend is bullish (SuperTrend confirms uptrend), * MPO shows supportive momentum or recently recovered from oversold conditions, * there is no major nearby resistance, then a long position can be considered within a strong confluence setup. Another key use case is dynamic trade management. The SuperTrend line naturally acts as a trailing stop, adjusting with price movement and allowing traders to: * protect profits, * stay in trends without manual stop adjustments. Adaptive behavior further enhances this by tightening the trend line during extreme momentum conditions (OB/OS), improving responsiveness to potential reversals or pullbacks. Built-in TP/SL levels extend this into a complete trade planning tool. Each signal provides immediate visual structure: * stop loss level * risk-based take profit targets (RR-based) This allows quick evaluation of risk/reward before entering a trade. In practice, the indicator works as: * a trend filter (direction), * a momentum context tool (MPO), * and a trade management framework (trailing + TP/SL), rather than a standalone buy/sell system. █ NOTES * Works across all markets and timeframes * MPO is not a direct entry signal — it modifies trend behavior * Adaptive ATR mode is limited to 200 bars or until trend change * Higher sensitivity → faster reaction, more signals * Lower sensitivity → smoother and more stable trend * Overextension indicates increased pullback probability, not reversal certainty * Best results when combined with: * market structure * support/resistance zones * additional confirmation tools
Pine Script® indicator
by Uncle_the_shooter
EMA/WMA Channels + SMA20 (Acid/Wine)This indicator plots two Bollinger Band-style channels using different moving averages to provide a clearer view of price structure and volatility. The first channel is based on an EMA (Exponential Moving Average) and represents the primary, more responsive trend. The second channel uses a WMA (Weighted Moving Average), offering a slightly smoother perspective on price movement. Both channels are calculated using the standard deviation of price, creating dynamic upper and lower bands that expand during high volatility and contract during consolidation.
Pine Script® indicator
by h4ck07
Liquidity Trap PRO SystemGold exhibits multiple liquidity layers across higher timeframes, particularly the 4-hour and 1-hour structures. The objective is to precisely identify where significant liquidity is resting within these zones. Once these liquidity areas are mapped, price typically gravitates toward the designated “green zone.” On the 5-minute timeframe, a rejection from this region often provides the optimal entry point. This should not be taken mechanically—incorporate discretionary judgment through overall market structure, trend context, and price behaviour to refine timing and confirmation before execution.
Pine Script® indicator
by alok6065_ak
BoaBias: MTF ALMA SuperTrend & Stats█  WHAT IT DOES Multi-timeframe ALMA with SuperTrend-style regime logic on 15m, 1H, 4H, 1D, 1W on one chart. Per-TF ALMA lines ; separate bar colors for regime; optional filled bands between adjacent TF ALMAs. Optional statistics table : average and current run lengths, State ( BULL / BEAR / NEUT ), 1-bar and short-run (≤ N bars) counts, max runs, and Avg OH stretch columns. OH vs avg (per TF) controls how Cur Short / Cur Long cells highlight vs their rolling averages. MTF overheat labels on history (toggle in settings; on in default preset): ·S (bear run stretch) below the bar, ·L (bull run stretch) above the bar; one timeframe per text line; minimum overheated TF count is separate for bear vs bull; vertical stack spacing limits overlap on consecutive bars. No alert() in Pine — use TradingView’s alert UI if needed. █  HOW IT WORKS ALMA: Arnaud Legoux moving average via ta.alma() (length, sigma, offset). SuperTrend-style bands: upper = ALMA + factor × stdev; lower = ALMA − factor × stdev; regime flips on band-cross style logic. MTF: request.security with barmerge.gaps_off and barmerge.lookahead_off (no lookahead). Parameters are per timeframe. Statistics: Rolling window per TF for completed and current regime runs; chop metrics for very short runs; max run and Avg OH scans use min(window, Max bars for Max/OH scan) internally. Labels: Toggle in inputs (on in defaults). Same heat thresholds as table per TF ; label fill colors follow bar regime colors (bear / bull) with white text. █  ORIGINALITY MTF overlay of ALMA-based SD SuperTrend combined with a per-TF run statistics layer, per-TF overheat multipliers , and MTF overheat labels (separate bear/bull gating + stack spacing; toggleable). Pine v6, self-contained. Inspired by public ALMA / SuperTrend discussion; wiring, table, heat logic, and labels are specific to this script. █  HOW TO USE First use: Wrong scale? Right-click → Pin to scale → Pin to right scale. Enable/disable each timeframe; tune Factor, SD length, ALMA length, sigma, offset per TF. Statistics: Set window length and Max bars for Max/OH scan (performance vs accuracy). OH vs avg (per TF): Adjust each TF’s multiplier — drives red highlight on Cur Short/Long vs average and optional label conditions. MTF overheat labels: On in the default preset (you can disable or change which TFs are included). Tune Min TFs per side (·S vs ·L), stack step (× ATR), and max label count (platform cap 500). Optional: only if chart ALMA flips — MTF overheat (min TFs + list) is read from the previous bar; ·S prints on the current bar if that prior bar was MTF·S overheated and the chart closes BEAR→BULL; ·L if prior was MTF·L and chart BULL→BEAR. With the option off, overheat and label stay on the same bar. Chop rows: “Runs ≤ N bars” counts short regime lengths for context — not broker “fake” fills. Interpretation: Stretched runs vs average are context , not predictions. Performance: First attach or long history: full recalculation may take several seconds — wait until processing finishes. To speed up: less chart history, turn off the table or MTF labels, or reduce statistics windows / Max bars for Max/OH scan. █  PERFORMANCE / LOAD TIME The script runs multiple MTF security calls and statistics on each bar. On first load or a long visible history, TradingView may need several seconds to finish — wait before assuming the table or labels failed. If the chart feels heavy, reduce loaded history, disable the table or overheat labels, or lower window sizes and the Max/OH scan cap. █  LIMITATIONS Trend logic lags; ranges whipsaw; MTF adds context, not certainty. Combine with other analysis.
Pine Script® indicator
by Goldfinch_song
3